Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-19-2011, 06:16 PM
pivot pivot is offline
Learning to use the forums
 
Join Date: May 2011
Posts: 2
Default Bypassing AC w/pully or serp belt?

Good evening gents...I have had to throw down some cash over the last few weeks...Starter, Battery, u joints. other then that my truck runs like a champ...AC compressor is whining hard and I would like to bypass it all together. Do I have to remove the Compressor and install a bypass pully or can I bypass with a new serp belt (no AC) and just leave the compressor attached?..thanks

very cool forum..Im sure il be many times..
__________________
2000 Super Cab 4x4 3.0 Auto 166k
Reply With Quote
  #2  
Old 05-19-2011, 06:21 PM
Show Show is offline
Ford Ranger Owner
 
Join Date: May 2011
Posts: 74
Default Re: Bypassing AC w/pully or serp belt?

Should just be able to use a non A/C belt. But check the belt routing sticker under the hood on the core support for routing information.
__________________
1995 Ranger XLT 4.0L/TH700-R4/4.3 Atlas II

D44HP/D60FF, 4.88s, ARBs
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
LOUD belt squeak -Is it the pulley or belt tensioner!? Corovius Other Engine Tech 16 06-20-2011 12:59 PM
Want to Buy: 2.3 Serp. System 91dime Engine & Drivetrain Parts 1 01-23-2011 02:40 PM
serp belt question ranger4.0 4.0 SOHC / 4.0 OHV Tech 3 01-08-2011 01:41 PM
2000 3.0 Serp Belt JamesM03 3.0 Vulcan Tech 3 10-15-2010 05:45 PM
Can't get Crank Pully off sofireguy 4-Cylinder Tech 5 12-14-2009 09:06 PM