Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 01-02-2012, 02:53 PM
Cobrastriker Cobrastriker is offline
Learning to use the forums
 
Join Date: Dec 2011
Posts: 4
Default Need help identifying part

I broke this part putting plugs and wires in. The two coolant hoses run outta firewall into a plastic valve with two nipples on each side. The two outta firewall go in one side then the other side has two that run to water pump and other goes to intake. It also has a vacuum hose connected to it. There is a valve inside that I can see where the piece broke. It's plastic and about 4 or 5 inches long about an inch in diameter. I've called local part stores and they have no
Idea and I called ford which they would have to look at it. No part numbers on it. I know I could go to junk yard and get it but I'm trying to find out the correct term so I can call ford and get it. If I have to I will take it down there but I'm trying to minimize driving around looking for it. So it's a valve that coolant runs through? Maybe a coolant sending unit or something?? Any help would be appreciated. Thanks
__________________
1998 Ford Ranger XLT 2wd 4.0
Reply With Quote
  #2  
Old 01-02-2012, 02:54 PM
01_ranger_4x4 01_ranger_4x4 is offline
OIF Veteran

 
Join Date: Feb 2010
Posts: 6,044
Default Re: Need help identifying part

pic?
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift
-33x12.5 BFG KM2's on Mickey Thomson classic locks
-4:56 gears
-Auburn gear LS
-James Duff traction bars
-Headers
-Flowmaster duals
-SCT X-Cal2 and some small exterior mods

http://www.cardomain.com/ride/2321189

2005 F-150 Lariat 4x4
-LED third brake light
-Weathertech floor liners
-Edge tuner
Reply With Quote
  #3  
Old 01-02-2012, 03:18 PM
tpwsr1 tpwsr1 is offline
Like the Forums
 
Join Date: Sep 2011
Posts: 36
Default Re: Need help identifying part

Hello, it is called a water valve. It cuts the coolant off when the ac is on max (recirc). Any auto parts store should have the part you need.

Tom W
__________________
2001 ranger short cab short box 2.3 liter 5 spd manual
Reply With Quote
  #4  
Old 01-02-2012, 03:23 PM
dnewman633 dnewman633 is offline
Ford Motor Co
 
Join Date: Nov 2011
Posts: 164
Default Re: Need help identifying part

Go to Advance Auto.com and search for part #'s 74809 and 74859.
__________________
Dan

2004 FX4 4.0 4X4 Extend cab...
265/75/16 tires
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Identifying Part SimplexDesign 4.0 SOHC / 4.0 OHV Tech 2 10-12-2011 12:04 AM
Broke part on carb, Need Help identifying. Redneck13x 4-Cylinder Tech 1 06-14-2011 08:06 PM
94 2.3L Help Identifying Loose Wire leftofsanity Electrical Tech 2 06-07-2011 11:50 AM
Help identifying a rim? bugz1racing Wheels and Tires 7 12-28-2010 05:44 PM
help identifying ranger (fx4) atrocity General Ford Ranger Discussion 20 07-03-2009 05:21 AM