I'm planning on replacing my 60/40 seats with a pair of bucket seats in the front and I was wondering, is it possible to install a handbrake lever in the middle instead of the pedal off to the side under the dash? If the brakes fail I would be much quicker to grab a level in the center than get my foot up to that pedal, plus it would make for some fun drifting in the winter

__________________
Black 1996 Ford Ranger XLT 3.0L V6 2WD - blue LED underbody neon, blue LED backlighting in headlights and reverse lights, blue EL wire in side emblems and grille emblem, blue LED under-dash lighting, custom 1/4" steel tubing rear bumper, Diamond plate toolbox, dual 4' Fiberglass CB antennas

yeah but after intense modding lol

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

Anything is possible when you have enough money

Doing it in my truck with a hydro lever from eBay just going to the t into the rear brakes since I have a expo 8.8 with disks. And after over a year in the truck the ebrake stopped workin. Pedal rachets and everything it just doesn't engage anymore

__________________
2008 ford escape xlt 3.0 v6 4x4

94 xlt 5spd longbed,
Was a built 2.3 turbo currently no motor or trans
5.0 swap coming soon
6/5 drop with dream beams,8.8 373 posi,17x9 wheels,swp seats,8k hids, autometer guages, Wideband o2, shiftlight, illusive trans x-member, 01-04 4x4 front bumper
PNW Crew
AC

Ah mine still has the stock drum brakes. I'll have to crawl around under there and see if it's possible to reroute the cable and look at levers in other cars at the local junkyard, maybe I can custom make something

__________________
Black 1996 Ford Ranger XLT 3.0L V6 2WD - blue LED underbody neon, blue LED backlighting in headlights and reverse lights, blue EL wire in side emblems and grille emblem, blue LED under-dash lighting, custom 1/4" steel tubing rear bumper, Diamond plate toolbox, dual 4' Fiberglass CB antennas

It probably would be cheaper to install a Line-Lock on your hydrolic brake system
That way you can put the switch ANYWHERE

__________________
1999 Ford Ranger XL
Vulcan V6, K&N 33-2106 Filter, 3:73 Gears,
FRONT 3'' Susp Lift/REAR 3'' susp.+ 3" blocks,06 Mirrors
31"/10.5"-15" BFG on AR-172 Polished Rims,Smitybilt Console
95 Mustang Saleen Seats,Alternating Blinker MOD
Pioneer CD/iPod/GPS,6.5 Polk Audio/6.5 Sub-Woofers,
Stainless Bed Extender,Throttle and Dome Light MOD,
12" Tool Box,Billet Grille,NightShade Tint,Projector Headlamps
6000K H.I.D. so i can see at night! LOL

JESUS is LORD!

I've never heard of those. They use the existing brake lines running to the back?

__________________
Black 1996 Ford Ranger XLT 3.0L V6 2WD - blue LED underbody neon, blue LED backlighting in headlights and reverse lights, blue EL wire in side emblems and grille emblem, blue LED under-dash lighting, custom 1/4" steel tubing rear bumper, Diamond plate toolbox, dual 4' Fiberglass CB antennas

You can choose!
I had them hooked up to the rear of my jeep for parking/theft security

and i installed them on my front lines on my 1968 Dodge Dart 340 Muscle car for burn outs!

http://www.jegs.com/p/Hurst/Hurst-Ro...45801/10002/-1

__________________
1999 Ford Ranger XL
Vulcan V6, K&N 33-2106 Filter, 3:73 Gears,
FRONT 3'' Susp Lift/REAR 3'' susp.+ 3" blocks,06 Mirrors
31"/10.5"-15" BFG on AR-172 Polished Rims,Smitybilt Console
95 Mustang Saleen Seats,Alternating Blinker MOD
Pioneer CD/iPod/GPS,6.5 Polk Audio/6.5 Sub-Woofers,
Stainless Bed Extender,Throttle and Dome Light MOD,
12" Tool Box,Billet Grille,NightShade Tint,Projector Headlamps
6000K H.I.D. so i can see at night! LOL

JESUS is LORD!

Thats pretty cool! I may consider those, Thanks!

__________________
Black 1996 Ford Ranger XLT 3.0L V6 2WD - blue LED underbody neon, blue LED backlighting in headlights and reverse lights, blue EL wire in side emblems and grille emblem, blue LED under-dash lighting, custom 1/4" steel tubing rear bumper, Diamond plate toolbox, dual 4' Fiberglass CB antennas