Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-22-2011, 09:21 AM
VegasRanger02 VegasRanger02 is offline
Ford Tough
 
Join Date: Aug 2010
Posts: 416
Default Stainless Steel Brake Lines - Where and Who?

Anyone know where to get good stainless steel brake lines for the front and rear? Something reputable and longer than stock is what Im looking for.. Anyone have experience?

I found some on ebay but ive never hear of them,

I have an 02 XLT. Discs front, drums rear.

thanks
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
Reply With Quote
  #2  
Old 04-22-2011, 06:53 PM
blkranger231 blkranger231 is offline
Banned
 
Join Date: Apr 2010
Posts: 1,030
Default Re: Stainless Steel Brake Lines - Where and Who?

Couple guys we have used at the shop-
http://www.classictube.com/
http://www.spieglerusa.com/brakes/cu...ake-lines.html
Reply With Quote
  #3  
Old 04-22-2011, 07:17 PM
VegasRanger02 VegasRanger02 is offline
Ford Tough
 
Join Date: Aug 2010
Posts: 416
Default Re: Stainless Steel Brake Lines - Where and Who?

Cool thanks ill look into them
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
Reply With Quote
  #4  
Old 04-22-2011, 09:57 PM
doyouquaxu doyouquaxu is offline
Almost ******
 
Join Date: Mar 2011
Posts: 7,466
Default Re: Stainless Steel Brake Lines - Where and Who?

you can buy brake lines from an f350, the fittings are all the same. depending on what ABS type you have depends on which model f350 to get fittings from. i got some from a 4x4 with 4wabs (i have 4wheel abs on my ranger), and they're a direct swap, just gotta bend the hard line a bit.

http://www.therangerstation.com/tech...neUpgrade.html
http://www.therangerstation.com/tech...ine_Front.html
Reply With Quote
  #5  
Old 04-22-2011, 11:10 PM
Gumcrew2 Gumcrew2 is offline
Ford Tough
 
Join Date: Feb 2011
Posts: 287
Default Re: Stainless Steel Brake Lines - Where and Who?

Walk into any local racing/speed shop that sells drag racing stuff. They always are able to match something up for what I need (I run 38" SS on the front and a 24" in the back on my other vehicle),
__________________
'83 Ford Ranger 2.3L 4Spd, Dual Tanks, 195/60R15's, Welded Rear End TOTALLED AT 483,211 MILES
Reply With Quote
  #6  
Old 04-23-2011, 08:05 AM
VegasRanger02 VegasRanger02 is offline
Ford Tough
 
Join Date: Aug 2010
Posts: 416
Default Re: Stainless Steel Brake Lines - Where and Who?

Ok, good advice.
__________________
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
making non-stainless step bars last. racsan Exterior Tech 2 04-01-2011 05:38 PM
Want to Buy: Chrome/stainless step bars Black Beauty Exterior Parts 0 02-03-2011 05:11 PM
Painting Stainless bed bars desjardo Exterior Tech 6 05-14-2010 09:16 PM
Are these bed bars chrome or stainless? ladyranger Exterior Tech 6 04-22-2010 07:22 PM
PLEASE HELP break lines Devan Drivetrain Tech 3 12-02-2009 07:56 PM