Speedo doesnt work need assistance
So you all know check engine came on abs came on no speedo reading..... Ok so the fix for this is a new VSS. I just swapped it out with a new napa Vss it read 1.88k Ohms same as auto zone so i picked it up installed it and what do you know i get nothing.... Which leads me to my next point what do i do now. I know the abs is controlled by that sensor so maybe it could be my #3 Relay or My #7 relay under my hood Because those both deal with the 4WABS. Idk what to do next i want it fixed it doesnt need to be fixed but i would really enjoy that for when i have to sell my truck. Maybe the magnet it reads off of in the Diff housing could have came loose.... Idk im just throwing ideas around....
Any help would be apprieciated thanks all.
Edit: I look under the hood and the #3 relay i was talking about is a 50A Fuse but there isnt one in there it controls the 4WABS do i not even have 4WABS.........................IM SO CONFUSED AND AGGRAVAITED!!!!!!!!!!!!!!!
2000 Ford Ranger 2.5l SOHC, 5spd Manual, Cold air intake, 2.25 catless pipes to a flowmaster 40 side exit exhaust, H.I.D.s, 2 10" subs with custom built box that fits perfectly.