Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-28-2018, 07:44 AM
yamboy86 yamboy86 is offline
Learning to use the forums
 
Join Date: Feb 2018
Posts: 1
Default 2012 ford ranger bleeding clutch

Replaced the master cylinder, bled the clutch up and it worked for a bit. Then the pedal would loose half of its travel, bled it again and it did the same thing . Truck has been sat for a few months and I have now replaced the master cylinder again just incase the other was faulty, bled the with a pressure bleeder this time and the brake fluid is just leaking out of the bleed hole on the side of the gearbox and there is no clutch at all. (Hoping it isn't the slave cylinder as it's gearbox off job) would the truck need to be started to create a vacuum for it to work or something like that? As it hasn't been started for a few days?

If anyone could help today that would be awesome haha?

Sent from my Pixel using Tapatalk
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 T6 Ranger clutch bleeding sony.w890 Drivetrain Tech 6 01-14-2018 07:42 AM
95 ranger bleeding clutch help please dave g Drivetrain Tech 4 01-04-2016 06:50 AM
bleeding clutch 96_4x4_XLT Drivetrain Tech 4 04-09-2013 11:35 AM
Solution to Ford Ranger clutch bleeding/transmission whining problem raymilosh Drivetrain Tech 9 02-09-2013 08:10 PM
2012 ford ranger. if the world gets to 2012.. 90fordranger General Ford Ranger Discussion 10 09-28-2010 07:23 PM