Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 02-04-2016, 01:37 PM
patriot10 patriot10 is offline
Learning to use the forums
Join Date: May 2012
Posts: 13
Default Transfer case replacement issues

Can the transfer case (the male part that goes into into the transfer case motor) be turned by hand to line up with the new TC motor?

Can I use vice grips on a piece of rubber over the shaft end to turn it to match with the motor?

1998 XLT extended cab 4x4 Splash
Reply With Quote
Old 02-04-2016, 02:58 PM
Jimmyspy Jimmyspy is offline
Ford Ranger Driver
Join Date: Feb 2012
Posts: 2,172

Sure, you can turn it by hand. There should be markings on the case itself to indicate what you're in (4hi, N, 4lo).
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
33x12.5 Duratracs

1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
Reply With Quote

4.0, 4.0 engine, 4x4, case, transfer

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Transfer case Rilz Drivetrain Tech 1 11-08-2015 01:11 PM
Transfer Case Issues 4WD and 4 Low lukehowell10 4.0 SOHC / 4.0 OHV Tech 2 06-26-2015 05:55 PM
02 Transfer Case Tim B Drivetrain Tech 0 12-06-2013 02:22 PM
Replacement Transfer Case PHAL23 Drivetrain Tech 1 03-19-2013 06:35 PM
Issues with my new truck. transfer case? jczerski Drivetrain Tech 0 03-12-2012 03:46 PM