OK so I have a 96 ranger stx 4.0 truck was running perfect last night went to start for work and the clutch petal is froze solid???? I ended up bypassing the sensor so I could start the truck without using the petal in hopes to have the engines heat thaw it out any suggestions/ tips thank you in advance

If you have moisture in the clutch hyd fluid then it could freeze up or you have a bad master or slave cylinder on the truck

__________________
1999 Ranger 4.0 and extreme Snap-on tool fetish

Or the connection to the slave is loose.

__________________
2014 F150 xl 3.7 6 speed auto.

I would check this first.

__________________
2003 Ford Ranger XLT FX4 Off Road 5-Speed 4.0L V6

My clutch line came off last week and i had to vacuum bleed the slave cylinder. It could be that the spring clip holding the fittings together lost a little spring tension.

__________________
2014 F150 xl 3.7 6 speed auto.

Yeah, I'd make sure the line is connected to the slave first.

__________________
2000 Ford Ranger XLT
Extended Cab
3.0 Flex
4x4
Manual Transmission
Offroad Package

Yeah it was the hydraulic line. Thanks for all the help and quick responses best app I've ever downloaded thanks again!