|
02-03-2015, 02:40 PM
|
|
Ford Tough
|
|
Join Date: Jul 2014
Posts: 403
|
|
Need help
Went to take off the belt to replace my alternator and the bolt snapped half. I have no clue what to do now.
__________________
2000 Ford Ranger XLT, stock rims and tires, 3.73 gears, 4x4, V6 Vulcan, torsion bar crank
|
Register and never see these ads again. |
|
02-03-2015, 02:43 PM
|
|
Like the Forums
|
|
Join Date: Jan 2015
Posts: 47
|
|
is that the bolt for the tensioner?
|
02-03-2015, 02:48 PM
|
|
Ford Tough
|
|
Join Date: Jul 2014
Posts: 403
|
|
Quote:
Originally Posted by mrcolebarry
is that the bolt for the tensioner?
|
Yep. Went to losen up the belt it it snapped so easily.
__________________
2000 Ford Ranger XLT, stock rims and tires, 3.73 gears, 4x4, V6 Vulcan, torsion bar crank
|
02-03-2015, 03:01 PM
|
|
Like the Forums
|
|
Join Date: Jan 2015
Posts: 47
|
|
well since part of the bolt is broke off inside I'd imagine you'll have to replace the whole tensioner assembly
|
02-03-2015, 03:11 PM
|
|
Still around
|
|
Join Date: Jun 2012
Posts: 2,298
|
|
Quote:
Originally Posted by DatRanger
Went to take off the belt to replace my alternator and the bolt snapped half. I have no clue what to do now.
|
If that is the bolt for the pulley on the tensioner. If so replace the tensioner. Otherwise it's time to use an easy out.
__________________
2011 Ranger XLT 4x4 3.73 8.8" Trac-lok #1 T-bars, K -springs, LineX bedliner, General Grabber AT2's, Tonnopro tri-fold, CoverKing Realtree AP seat covers, OEM pre-keys, axle spacers, Bilstein 4600's, Hellwig AAL. Ziebart Undercoat
'98 Ranger XLT 2WD (sold)
|
02-03-2015, 03:16 PM
|
|
Ford Tough
|
|
Join Date: Jul 2014
Posts: 403
|
|
Quote:
Originally Posted by 99Ranger376
If that is the bolt for the pulley on the tensioner. If so replace the tensioner. Otherwise it's time to use an easy out.
|
easy way out?
__________________
2000 Ford Ranger XLT, stock rims and tires, 3.73 gears, 4x4, V6 Vulcan, torsion bar crank
|
02-03-2015, 05:04 PM
|
Ford Tough
|
|
Join Date: Apr 2014
Posts: 250
|
|
Easy out ain't always the easy way out
You might need a right angle drill to gain the room you'll need to get even a short drill bit on the center of the remaining stud. If any of your buddies are plumbers or electricians, a right angle drill is a basic tool of their trade.
__________________
99 Ford Ranger XLT regular cab stepside 2.5l 4 cyl. automatic Fiberglass Custom brand 6' bed cap.
Last edited by nkfro; 02-03-2015 at 05:06 PM.
|
02-03-2015, 05:53 PM
|
|
Tank Diver
|
|
Join Date: Mar 2010
Posts: 3,129
|
|
Re: Need help
Quote:
Originally Posted by DatRanger
easy way out?
|
An Easy Out is a brand name for a bolt or screw extractor tool.
You use a drill bit to make a hole in the snapped bolt so you can tap in an extractor. Then use something to twist the extractor to remove the stuck screw or bolt. Say a wrench or a pair of locking jaw pliers (Vice-Grips). The twist in the extractor tool is the reverse of the fastener threads, so will bite into the fastener and work to turn the fastener.
__________________
Sgtsandman's Work in Progress
2011 Ranger XLT, 4X4, 4 door Super Cab. 4.0L, 5 Speed M50D-R1HD, 3.73:1, 8.8" open differential, Jason Pace cap
2019 Ford Ranger STX FX4, Super Crew, 2.3L Ecoboost, 10 speed automatic, 3.73:1 with rear locker, Leer 100XR cap
|
02-03-2015, 05:56 PM
|
StationContrarian
|
|
Join Date: Sep 2014
Posts: 307
|
|
Re: Need help
Use the right grade/type of drill bit, too, to start the hole for the EZ out...otherwise the bit will waller around on the bolt stub and you'll wind up drilling wrong. You have the bolt head, so lock it in a vise and practice with a couple of hardened bits first.
|
02-03-2015, 05:57 PM
|
|
Still around
|
|
Join Date: Jun 2012
Posts: 2,298
|
|
Quote:
Originally Posted by DatRanger
easy way out?
|
An Easy Out is a tool that helps remove broken studs. But if you broke the bolt on the pulley just replace the tensioner.
__________________
2011 Ranger XLT 4x4 3.73 8.8" Trac-lok #1 T-bars, K -springs, LineX bedliner, General Grabber AT2's, Tonnopro tri-fold, CoverKing Realtree AP seat covers, OEM pre-keys, axle spacers, Bilstein 4600's, Hellwig AAL. Ziebart Undercoat
'98 Ranger XLT 2WD (sold)
|
|
|