|
02-01-2015, 12:37 PM
|
|
Learning to use the forums
|
|
Join Date: Jun 2014
Posts: 3
|
|
89 cab on 98 chassis?
Im wanting to put my 89 standard cab on a 98 ranger frame. The 98 frame is from an extended cab, is there any problems i would run into doing this swap?
|
Register and never see these ads again. |
|
02-01-2015, 03:54 PM
|
|
Ford Tough
|
|
Join Date: Feb 2014
Posts: 275
|
|
I'm not sure, but wouldn't the extended cab frame be longer?
It has a longed wheelbase as well (?)
|
02-01-2015, 03:55 PM
|
|
ford dealer parts guy
|
|
Join Date: Apr 2011
Posts: 20,938
|
|
Re: 89 cab on 98 chassis?
Quote:
Originally Posted by RED33
Im wanting to put my 89 standard cab on a 98 ranger frame. The 98 frame is from an extended cab, is there any problems i would run into doing this swap?
|
completely different
__________________
2021 F150 5.0 Screw
Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0
Master Certified Ford Parts / Warranty Admin
|
02-01-2015, 04:03 PM
|
|
Like the Forums
|
|
Join Date: Aug 2014
Posts: 34
|
|
I saw this swap on a ranger at my local scrap yard, it looked great! Even though people started tearing it apart already. It looked like it was in good shape
__________________
2000 Ranger 4.0L 4x4 XLT Sport Extended Cab StepSide, 2" Block Lift, 32" A/T's, 2" wheel spacers, Aftermarket Taillights, Aftermarket Headlights with HALOs, 12" 1000W Fusion Sub, Vacuum-to-Manual hub conversion, Much More to come!
|
02-01-2015, 04:11 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2009
Posts: 1,419
|
|
Quote:
Originally Posted by RED33
Im wanting to put my 89 standard cab on a 98 ranger frame. The 98 frame is from an extended cab, is there any problems i would run into doing this swap?
|
=======================
Not sure bout pre 93, but I know I had the same thought a while back, but was gonna put a 95 std. cab on a 99 std cab chassis. I know that the difference was like 4", the cab mounts measured to be in same place, but the 98 up frames are 2 piece, so my thought was to drill out the 16 rivets, move the rear frame section 4" forward & bolt or weld it. Beds interchange without any problems 93-08, is 09 they went to 10 bolts instead of 6.
Definitely keep us informed PLEASE!
|
02-02-2015, 06:02 AM
|
|
Learning to use the forums
|
|
Join Date: Jun 2014
Posts: 3
|
|
Another forum I looked at said they would all swap. 82-10. It said the only difference was 2wd and 4wd have different mounts in the front. Did I get some bad info here? Here's the link,
http://www.therangerstation.com/foru...ad.php?t=68672
|
02-03-2015, 08:09 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2009
Posts: 1,419
|
|
FFT via PN# 5005 Frame Assy
Quote:
Originally Posted by RED33
|
=====================
I posted on that thread too.......
I did some checkin today when I had some time and this is what I know via FORD CPD Catalogin:
By Base PN# 5005 Frame Assy:
83-88
89-91
92 is a yr in itself
93-97
98-03
04-06
07-08
09-11 ten bolt beds
Now, I know that from 98 up are a 2 piece frame and are A-arm & Torque rod setups.
What I have no way of verifyin is if the cab mounts are in same location thru the years.
I was always under the idea that the 83-92 frames were narrower, but not for a fact. I may look into suspension PN#'s to see if the I-beams are same from 83-97, if they are, then that would mean they are the same width. I just thought of that as I was typin!
|
|
|
|
02-04-2015, 05:00 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2009
Posts: 1,419
|
|
CPD Catalogin 2
I-beams:
83-88
89-94
60/40 Seat Tracks:
83-89
90-91
92-94
95-96
97
98-03
|
|
|