Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-23-2009, 09:38 PM
2000 2000 is offline
Learning to use the forums
 
Join Date: May 2009
Posts: 2
Default 2k ford ranger stepside truck box

i have looked all over. did alot of researching on the internet. i have a 2000 ford ranger 4x4 stepside or flareside as some people call it. i cannot find a tool box for the bed that will fit. with my bed liner in at the bottom between wheel wells measures about 39" wide. at the top between rails its about 46" wide. if anyone has experience with this i would really appreciate it. thanks!
Reply With Quote
  #2  
Old 05-24-2009, 05:59 PM
LittleBigFoot LittleBigFoot is offline
Naked and Famous
 
Join Date: May 2009
Posts: 69
Default

You're pretty much out of luck.

Hit up an army surplus and look for ammo boxes if ya need one. Bolt it down and find a pad lock and you're good to go.

That's how I made my center concile
__________________
2000 Ford Ranger XLT: SAS, Sliders, Bumpers, Gears, Lockers, Shafts, 33gal gas tank, Shortened from 130 to 112" WB, Home brew bed and spare carriers,

Receiving: tons and a 351w stroked to a 427.

1972 Ford F250 "Explorer", 390fe Big block, lime green

Receving: 14bolt rear w/ disks, cam, 650cfm 4 barrel, intake, exhaust,
Reply With Quote
  #3  
Old 05-24-2009, 07:15 PM
98blownranger 98blownranger is offline
Custom KeyChain R Me
 
Join Date: Feb 2009
Posts: 718
Default

there are toolboxs made for the step side boxes, you may need to trim the top 4 inches of you liner for it to fit. I am sure you don't
__________________
Quote:
Originally Posted by redrumedge View Post
98blown you should be an MD! that's the same stuff my doc asks and ur spot on man!!!
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner


lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower


custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
http://breyperformancemachine.shutterfly.com/
Reply With Quote
  #4  
Old 05-25-2009, 06:45 AM
2000 2000 is offline
Learning to use the forums
 
Join Date: May 2009
Posts: 2
Default

thanks for the ideas. i think im going to take out the bed liner and measure. if i can find a box then i will cut the liner.
Reply With Quote
  #5  
Old 05-25-2009, 07:21 AM
98blownranger 98blownranger is offline
Custom KeyChain R Me
 
Join Date: Feb 2009
Posts: 718
Default

there are a few rangers in town here that have stepside with toolboxs
__________________
Quote:
Originally Posted by redrumedge View Post
98blown you should be an MD! that's the same stuff my doc asks and ur spot on man!!!
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner


lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower


custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
http://breyperformancemachine.shutterfly.com/
Reply With Quote
Reply

Tags
box, flare, ranger, side, step

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
FOR SALE!! 1993 Ford Ranger Stepside getmoney Trucks 3 07-24-2009 01:07 PM