|
02-11-2014, 09:45 AM
|
Learning to use the forums
|
|
Join Date: Feb 2014
Posts: 4
|
|
Re: The "what do you hate about your Ranger today" thread
Quote:
Originally Posted by 99Ranger376
Broken? Or a 2wd?
|
2wd. Do you guys ever drive in 2 or 1 or always just regular Drive on automatics?
|
Register and never see these ads again. |
|
02-11-2014, 09:50 AM
|
|
"How hard could it be?"
|
|
Join Date: Jan 2012
Posts: 2,179
|
|
Quote:
Originally Posted by brotherbear
2wd. Do you guys ever drive in 2 or 1 or always just regular Drive on automatics?
|
Sometimes I'll drop it down into 2 and turn off my O/D just to keep the tires from revving too much when they slip on ice and slush
Also, weight in the bed is your best friend. I put like 400lbs of sand on mine and it makes a world of difference
Last edited by TB-9862; 02-11-2014 at 09:54 AM.
|
02-11-2014, 09:50 AM
|
|
Ford Pickup
|
|
Join Date: Oct 2012
Posts: 109
|
|
Quote:
Originally Posted by TB-9862
Is it just the motor? I have my old one when I replaced my regulator (gear tooth on the arm was broken, motor was fine). Willing to part with it if ya want it. Also, is the chirp coming from the rear of your engine bay? Might be time to replace your camshaft synchro
|
I'm assuming it's the motor. It makes a hellacious whining sound when you try to put it back up. My buddy gave me his yesterday so I'll see for sure after work today.
The chirp sounds like it's coming from the wheels or brakes. It chirps when accelerating up until 45 mph then it stops. But then it comes back when Decelerating from 45. Also happens when hitting the brakes. Just had them replaced a little while ago and they never mentioned anything wrong. So I have no clue. I thought camshaft synchro was more of a 3.0 problem?
__________________
2003 Ford Ranger XLT 4.0 SOHC
|
02-11-2014, 09:53 AM
|
|
"How hard could it be?"
|
|
Join Date: Jan 2012
Posts: 2,179
|
|
Quote:
Originally Posted by Jatoman23
I'm assuming it's the motor. It makes a hellacious whining sound when you try to put it back up. My buddy gave me his yesterday so I'll see for sure after work today.
The chirp sounds like it's coming from the wheels or brakes. It chirps when accelerating up until 45 mph then it stops. But then it comes back when Decelerating from 45. Also happens when hitting the brakes. Just had them replaced a little while ago and they never mentioned anything wrong. So I have no clue. I thought camshaft synchro was more of a 3.0 problem?
|
Good luck with the window motor.
I have the same chirp, I think my brake pads are rubbing or something.
Yep 3.0 problem. Didn't know what engine you had, can't see sigs on my phone
|
|
|
|
02-11-2014, 05:20 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2013
Posts: 773
|
|
Quote:
Originally Posted by 99Ranger376
Why what's wrong with it?
|
Where should I begin
__________________
2000 Ford Ranger. It has the 4.0 EFI OHV motor. It is an automatic 4 speed with overdrive. It is lifted 7 inches (3" body, 4" suspension). It has 35/12.50/16.5 tires. The rims are Weld Racing Rims. It has a cold air intake.
|
02-11-2014, 06:18 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: The "what do you hate about your Ranger today" thread
Quote:
Originally Posted by WhiteLightning
Where should I begin
|
Most expensive.
__________________
Because Race Truck!
|
02-11-2014, 06:26 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2013
Posts: 773
|
|
Quote:
Originally Posted by shawn_house102
Most expensive.
|
Hahaha always start at the top. Motor starting to knock in the lower end, but I found that the oil had coolant in it which im now believing this to be the cause for the slight knock. Its burning coolant and warming up quicker then usual. Its starting weaker some days and its showing two po codes, 171 and 174. Idles kinda rough some days. I dont know. Probably nothing but something aint right.
__________________
2000 Ford Ranger. It has the 4.0 EFI OHV motor. It is an automatic 4 speed with overdrive. It is lifted 7 inches (3" body, 4" suspension). It has 35/12.50/16.5 tires. The rims are Weld Racing Rims. It has a cold air intake.
|
02-11-2014, 06:33 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: The "what do you hate about your Ranger today" thread
Quote:
Originally Posted by WhiteLightning
Hahaha always start at the top. Motor starting to knock in the lower end, but I found that the oil had coolant in it which im now believing this to be the cause for the slight knock. Its burning coolant and warming up quicker then usual. Its starting weaker some days and its showing two po codes, 171 and 174. Idles kinda rough some days. I dont know. Probably nothing but something aint right.
|
Searched the web and found out the common problem is bank 1&2 is running lean my sisters ranger has the same problem and it runs rough.. hope you get it worked out. Hope I helped lol.
__________________
Because Race Truck!
|
02-11-2014, 06:42 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2013
Posts: 773
|
|
Quote:
Originally Posted by shawn_house102
Searched the web and found out the common problem is bank 1&2 is running lean my sisters ranger has the same problem and it runs rough.. hope you get it worked out. Hope I helped lol.
|
Any information is always helpful. Hopeing its all cheap easy fixes.
__________________
2000 Ford Ranger. It has the 4.0 EFI OHV motor. It is an automatic 4 speed with overdrive. It is lifted 7 inches (3" body, 4" suspension). It has 35/12.50/16.5 tires. The rims are Weld Racing Rims. It has a cold air intake.
|
02-11-2014, 06:45 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: The "what do you hate about your Ranger today" thread
Quote:
Originally Posted by WhiteLightning
Any information is always helpful. Hopeing its all cheap easy fixes.
|
Someone told me to run a can of sea foam through my sister's but I never did. Not my problem . But hope it is cheap.
__________________
Because Race Truck!
|
02-11-2014, 07:09 PM
|
|
Ford Ranger Driver
|
|
Join Date: Feb 2013
Posts: 773
|
|
Quote:
Originally Posted by shawn_house102
Someone told me to run a can of sea foam through my sister's but I never did. Not my problem . But hope it is cheap.
|
Always thought about seafoam but i cant see spending 20 bucks a can for possible bad results
__________________
2000 Ford Ranger. It has the 4.0 EFI OHV motor. It is an automatic 4 speed with overdrive. It is lifted 7 inches (3" body, 4" suspension). It has 35/12.50/16.5 tires. The rims are Weld Racing Rims. It has a cold air intake.
|
02-11-2014, 07:36 PM
|
|
Ford Ranger Driver
|
|
Join Date: Dec 2010
Posts: 2,761
|
|
Quote:
Originally Posted by WhiteLightning
Always thought about seafoam but i cant see spending 20 bucks a can for possible bad results
|
Small price to pay for a noticeable difference in performance.
|
02-11-2014, 08:58 PM
|
|
Socially awkward.
|
|
Join Date: Mar 2013
Posts: 6,327
|
|
Quote:
Originally Posted by WhiteLightning
Always thought about seafoam but i cant see spending 20 bucks a can for possible bad results
|
20 bucks a can? You gettin the platinum plated can or something?
__________________
Blue 1998 Ford Ranger XLT stepside, single cab, 2.5L.
If you like LOLZ, click HERE for the best thread FRF has ever seen!
#BringbackHOI
|
02-11-2014, 09:01 PM
|
Banned
|
|
Join Date: May 2012
Posts: 2,958
|
|
Quote:
Originally Posted by 07XL
20 bucks a can? You gettin the platinum plated can or something?
|
^^^^^^^^
|
02-11-2014, 09:52 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2013
Posts: 4,731
|
|
Re: The "what do you hate about your Ranger today" thread
Quote:
Originally Posted by WhiteLightning
Always thought about seafoam but i cant see spending 20 bucks a can for possible bad results
|
I think I payed like $8 for a can
__________________
Because Race Truck!
|
|
|