Got them for $220 shipped to Canada in the next couple days (+ $60 handling and import fees)

http://www.amazon.com/gp/product/B0038B48DI
----------

Here's some Rangers on the forums I have seen with them:

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

Can I make 01' tails fit my 99'?

I like those

Possibly. Here is the official website: http://www.anzousa.com/ford-ranger-0...-g2-black.html

It does say 2001 to 2011. I'm not sure if the tail pieces changed from 99.

Someone on here oughta know.

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

Got them today and they are amazing! Here's some pics.

I have a question though. In the first pic I outlined an area in red where there is exposed circuit board for the LEDs. I tend to pressure wash my truck very often under and around the body. Will this be okay from water or should I try to cover it up?

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

Water proofing is never a bad thing

Yeah I would water proof it also silicone the edges just to make sure that no moisture gets in there

Silicon. Bingo!

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

lol shouldnt you have asked for opinions before ordering? they leak a ton. had some and they suck in that way. mine were always full of water. wrecks the led board.

__________________
http://treadlightly.org/quick-tips-f...four-wheeling/

I live in a very dusty, dry area so moisture is minimal. That is unless I soak them at the car wash.

Going to be generous applying the silicon.

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

eh..im not a fan, but if you like them, thats what matters.

__________________
2003 Ford Ranger XLT 3.0L V6, auto, electric everything..work in progress.

mods: 4" wNp spindles, 2" shackles, 2" blocks, 31s.

Installed the new tails

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

I like it they look pretty darn good. Did you end up sealing them?

Yeah, I sealed it up good. To be honest, I don't think it was necessary but I had greater peace of mind knowing they are waterproof.

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss

Those look great on your white truck! I wasn't sure when I saw the first pics but those contrast very nicely imo.

__________________
'02 XL SC, 2WD, 3.0 auto, tinted, mustang dome light, throttle cable, air box and blinker mods, clear corners, '06 tails, painted grill insert and bumpers, Mountaineer bucket seats and shorty console, XLT door panels, 06+ emblems.
Woodbridge, VA

Thanks, here's another one at night

__________________
2007 Ford Ranger XL 4.0L V6
Magnaflow Catback Exhaust,
6000K Bi-Xenon HID,
Anzo G2 LED Tails
Toyo Open-Country AT2 on 16" XD Series Hoss