i don't know about your truck but mine had some easy to get to bolts in the back of the bumper, i just got some mounting tabs to put my daylighters in front of the grill

Yes you have the easy mount option on your truck for in front of the grille, I cannot find any good pics showing it though:





90 degree bend with a hole drilled in each side. Just take bolt out line up tab and put bolt back in place.

__________________
Sold:2005 XLT 4x4 Ext. Cab. 4.0
Sold:2004 XLT 4x2 Ext. Cab. 3.0

Edit: ^^^Dangit Justin! lol!




Hey Luc, remember my four lights I had on the front of mine?

I made brackets similar to a product www.stuffforyourranger.com sells. Except mine were made for Slimlites and theirs is made for daylighters. They mount to existing bumper hardware found on the backside of 98-05 trucks at the bottom of each corner of the grille. You can stick your finger between the bumper/grille gap and feel them.

RangerJustin has daylighter sized lights on the front of his using lighttabs and they ain't that bad looking...




Here's detailed pics of my old setup...

__________________
'01 XLT disguised as a '03 Fx4 Level II.

go to home depot and they sell 90 degree steel, its like for bracketry and stuff on roofs. its really thick and is the perfect dimensions for the bumper. its also like $2 each so pretty cheap. you have the easy bolts like everyone said so you may just need to either drill out the brackets or add washers to compensate for two different sized holes

__________________
08 Ranger Sport 2wd
aFe CAI, 30x9.5.x15 Grabber AT2s, U/D pulleys, flowmaster super 44

"Those who make peaceful revolution impossible will make violent revolution inevitable."
- John F. Kennedy

"Somehow the "god of the athiests" delivers more miracles than all other religion combined than..."

Too slow...hehe

__________________
Sold:2005 XLT 4x4 Ext. Cab. 4.0
Sold:2004 XLT 4x2 Ext. Cab. 3.0

thx for all the input guys. im gunna order those mounting brackets. do those mount physically to the bumper? or do they mount with the tow hooks? now ill just need to figure out how to wire everything up lol

__________________
2001 XLT 4x4 V6 4.0L automatic
SAS in the process with dana 44
daylighter 130w lights
mods: Air box mod, painted headlights, blinker mod, blacked out ford emblem, infinity kappa speakers, 20% tint all around...more to come
oh i almost forgot, Hey Obama, screw you!!!!!

They reuse the bumper mounting bolts. Do one side at a time, take bolt out, place bracket there and tighten bolt back in. Not sure on your year, but on mine I had to take the whole grille and grille surround off.

__________________
Sold:2005 XLT 4x4 Ext. Cab. 4.0
Sold:2004 XLT 4x2 Ext. Cab. 3.0

Like I said earlier, they mount to existing bumper hardware. It is easiest to remove the grille or lower the bumper to get them on. Or just snake 'em up from underneeth.

Here's a pic showing the bolts they attach to...

__________________
'01 XLT disguised as a '03 Fx4 Level II.

i had to take my grill off the get the brackets in, can't remember if got to the bolts from the top or the bottom but i remember it was pretty easy

alright cool thx guys.

__________________
2001 XLT 4x4 V6 4.0L automatic
SAS in the process with dana 44
daylighter 130w lights
mods: Air box mod, painted headlights, blinker mod, blacked out ford emblem, infinity kappa speakers, 20% tint all around...more to come
oh i almost forgot, Hey Obama, screw you!!!!!