Hey everyone, a few months ago I mentioned I was planning a DIY flannel upholstery design project. Well, I just finished it up and it looks good for a first timer. The fabric is strong and the colors work very well with the existing interior colors. Take a look from the link below:


http://www.fordrangerforum.com/membe...assenger-door/

__________________
2001 Ford Ranger 6cyl - 4.0L.
MODS: Radio deck installation, rear seats removal, flannel interior upholstery
REPLACED: Transmission pan & 4x4 control module
PLANS: New bumper/fender colors, tires, rims, decals

It does look like a wel done job. I'm not sure on the pattern but the workmanship looks good. What does the rest of the truck look like? If you have an '80's Ranger with saddle blanket seat/bench covers, it would probably go very well together.

EDIT: I see you have a 2001. Oh well. It still looks like you did the job right.

__________________
Sgtsandman's Work in Progress
2011 Ranger XLT, 4X4, 4 door Super Cab. 4.0L, 5 Speed M50D-R1HD, 3.73:1, 8.8" open differential, Jason Pace cap
2019 Ford Ranger STX FX4, Super Crew, 2.3L Ecoboost, 10 speed automatic, 3.73:1 with rear locker, Leer 100XR cap

why would you do that? no offense.

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

If you like it that is all that matters

__________________

^that is true

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

I want to do this. But with camo pattern.

__________________
GOLDIE
1999 2.5L XLT
Herculiner | Kobalt tool box | K&N Filter | 6k HID's | 31's BFG | Eagle Alloy 186s | 102'' Whip | Cobra 19 DX IV | Fabtech 3.5 Spindles | Pro Comp AAL kit | 15% Tint | Mustang Dome

I agree but I also gotta wonder if you lost a bet while drunk or something. Do the seats and then I'll be impressed....

__________________
2011 Ranger XLT Supercab 4x4, 4.0L, Oxford White, factory skid plates.
Cranked T-bars (about 1 3/4"), Hunter brush guard w/ KC 130 watt lights, 5% tint, 15"x8" Fuel Revolver wheels, BFG KM2 31" tires

I was not drunk or lost a bet when I made this decision, although I could go for a beer right now haha. poopile, are you looking to do the same idea?

__________________
2001 Ford Ranger 6cyl - 4.0L.
MODS: Radio deck installation, rear seats removal, flannel interior upholstery
REPLACED: Transmission pan & 4x4 control module
PLANS: New bumper/fender colors, tires, rims, decals

Oh God No!!! Just messin' with ya though. It is your truck so if this trips your trigger then that's all that matters. You putting flannel on your door panels actually made my day.

__________________
2011 Ranger XLT Supercab 4x4, 4.0L, Oxford White, factory skid plates.
Cranked T-bars (about 1 3/4"), Hunter brush guard w/ KC 130 watt lights, 5% tint, 15"x8" Fuel Revolver wheels, BFG KM2 31" tires

not my cup of tea, but it looks good. nice job keeping the pattern straight. color matches the plastic well. what did you use to attach it? did you pull the panel off and wrap around the back side? how did you reattach the panel to the door panel?

__________________
Krylon Fusion is for Amateurs.

drppdyllwrngr: I used 3M Super 77 Multipurpose Adhesive spray to attach the flannel. I simply took the door panel off and yanked out the part of the panel that I wanted to mask. It was difficult because that covered piece is glued from the factory, so I had to be careful and patient with it. Then the flannel was ironed, measured and glued on by the 3M adhesive. I simply got that part of the panel snug with the existing door panel and hot glued it back together for a tight fit. It can be tedious but it's not a tough project overall. It's definitely different, though!

__________________
2001 Ford Ranger 6cyl - 4.0L.
MODS: Radio deck installation, rear seats removal, flannel interior upholstery
REPLACED: Transmission pan & 4x4 control module
PLANS: New bumper/fender colors, tires, rims, decals

I'm actually diggin it lol good job

__________________

2006 Ford Ranger XL "Dirty Girl" (Build Thread) TRADED

i dig it

__________________

I dig it. Not sure I would choose a flannel pattern but it does go good with you interior.

BTW, where did you find my shirt? I've been looking everywhere for it.

__________________
2003 Ranger XL, 4.0 SOHC, manual, t-bar adjust, pretty much stock......for now.

I think it's pretty sweet!!! And you did a really good job on it. You should do the center console armrest now.

__________________
2011 Ranger XLT 4.0 extended cab 4X4
3.73 diff limited slip
Snowdogg MD 68
Readylift 2.5" torsion keys
Air Shocks in the rear
2009 F250 XL 4X4 7'6" Western plow