Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-21-2009, 05:45 AM
ranger danger ranger danger is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 8
Default crankshaft pulley

I have a 1995 ranger 2.3 and my crankshaft pulley does not have holes for a puller. How do I remove it?

Last edited by ranger danger; 11-21-2009 at 06:18 AM.
Reply With Quote
  #2  
Old 11-21-2009, 07:33 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default

Pull the bolt in the center, and you will have to pry it off should come off some what easy. They are just pressed on there
__________________
2005 Edge

Reply With Quote
  #3  
Old 11-21-2009, 09:21 AM
ranger danger ranger danger is offline
Learning to use the forums
 
Join Date: Nov 2009
Posts: 8
Default

I will try that, thank you.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
1996 Ranger crankshaft position sensor vang0017 4.0 SOHC / 4.0 OHV Tech 5 06-07-2011 06:59 PM
How to remove Crankshaft Pulley + Hub? 4 banger ranger 4-Cylinder Tech 11 10-07-2009 08:34 PM
stripped power steering pump pulley vehder 4-Cylinder Tech 2 09-14-2009 11:39 AM
underdrive pulley on 4.0L SOHC 02slammedranger 4.0 SOHC / 4.0 OHV Tech 6 07-09-2009 11:14 AM
Idler Pulley Hardware Question xmicros 4-Cylinder Tech 1 05-05-2009 08:24 PM