Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-08-2011, 10:41 PM
navseawelder1 navseawelder1 is offline
Kentucky Wildcat Ranger
 
Join Date: Sep 2010
Posts: 27
Default Maf sensor

How do you disconnect the electrical connector to the MAF Sensor? I want to be sure so I don't screw something up. THANKS Mike
__________________
2003 Ford Ranger XLT Ext. Cab. No Mods
4.0 SOHC (E), Auto.
2WD
Reply With Quote
  #2  
Old 05-09-2011, 01:45 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: Maf sensor

U just have to compress the tab and wiggle it loose. Sometimes they are hard to compress down.
__________________
2005 Edge

Reply With Quote
  #3  
Old 05-09-2011, 02:51 PM
navseawelder1 navseawelder1 is offline
Kentucky Wildcat Ranger
 
Join Date: Sep 2010
Posts: 27
Default Re: Maf sensor

My MAF had a pin in the center of the torx screws. I had to remove the intake airtube to clean the MAF. Malbums/h330/navseawelder1/Cleaning%205-9-2011/MAF.jpg[/IMG]AF.
I don't know how the hell this picture dowhload works. I joined Photobucket & all.
__________________
2003 Ford Ranger XLT Ext. Cab. No Mods
4.0 SOHC (E), Auto.
2WD

Last edited by navseawelder1; 05-09-2011 at 05:06 PM.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
MAF sensor resistance readings Gum85 Electrical Tech 2 01-04-2011 06:55 PM
where is my MAF sensor ?????help!!! jackman General Tech 3 11-28-2010 10:47 PM
MAF sensor Cooter83 3.0 Vulcan Tech 16 11-25-2010 04:36 AM
How To: Clean MAF (Mass Air Flow Sensor) STL Engine/Drivetrain Guides 0 07-26-2010 05:05 PM
MAF Sensor? 7339 4.0 SOHC / 4.0 OHV Tech 1 11-05-2009 08:13 PM