Finally! My lift is on its way!
Just wanted to share that Im finally getting the front end done
. A moment of opportunity opened up and I got some brand new fabtech control arms and 2.5" lift springs for a great deal. I am ordering my bilstein 5100's tomorrow. I also got a steal of a deal on moog lower ball joints - 2 new for $35. Im also ordering some daystar evs red (softer) shock shaft bump stops and some black poly bumps to replace the stockers. Eventually I am going to get limit straps and SS brake lines, but the arms come with a bump stop to limit the upper arm droop, so that will suffice for now.
I'll get pics up as soon as it all gets in - delivery isnt estimated till early may...
I also plan to gusset the upper mounts to the frame and clean it up with black paint - should be a good start and handle nice until I want more
2002 Ranger XLT 3.0
General Grabber AT2 31/10.5/15, 15x7 ATX Slot, Hot girlfriend for passenger seat, Fabtech 2.5", Bilstein 5100, Poly Bumps, JBA Ceramic Coated Headers, Straigh pipe, Throttle Cable Mod, Air Box Mod, 5 Angle Valve Job, 180* Thermostat, Clear corners w/ Amber LEDs, Tinted Tails, 6000K Volt Digital HID Hi/Lo, K&N Drop-In, MAF Mod,