I want to finish my OHC then maybe get my interior redyed. After that it's disc brakes and maybe ditch my bars for some coilovers and moog uppers which should bring me down another 3".

__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan

wait ur dropping? for some reason i thought u were lifting...lol LIFT!

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

body lift, toolbox, custom headache rack, custom rear bumper, iron bull front bumper, full length expo console, ohc, and ill surely find more to do

__________________
2004 Step-side xlt4x4 4.0L 5-speed
Build Thread
37-14.5-15 Toyo M/T, 3 inch body liftProjected HID's, smoked tails, LED '06 corners, LED tails, LED back up lights
Intake, Chip, Straight Piped
Black interior with silver accents, LED Gauges, '04 Fx4 buckets, '99 expo full length console, Hurst Shifter

Yep!! Going down a little more. Not wanting a scraper, just less fender well gap...

__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan

Full power conversion with remote start and remote power windows. Going to put the window buttons on the center console.

__________________
My truck...
1997 Ranger XLT Extended Cab. Paid:$1700
15" Black Pacer Wheels w/ Goodyear Wranglers, Custom Digital Army Camo Front/Back emblem, Flat black front trim and grills, Dual Stereo w/Bluetooth and iPod sync, '00 Explorer Bucket Seats, Blacked out front corner lights, Back windows w/ 5% tint, Front w/ 35% , 6D maglite under rear window just for fun
Here is the truck inside and out...

X2. Got a ton of stuff to do to both trucks.

__________________

TIRES!!!! time to have sum fun!!

__________________
2010 Sport 4X2 4.0 5-spd. Rhino-lined. Torsion bar crank (1"). 31x10.5x15 Duratrac's. AAL. Custom decals.

paint the truck , powdercoat , frame , roll bar , bed rails , bumpers and frame ,,, and lime green box liner

__________________
Just a slightly modified ford ranger

Swap the front end to 06+ version.
I am collecting the parts for it.

__________________
1999 Ford Ranger 3.0l XLT RWD Stepside

Finish siding the house, fix (or replace) the fence out back, maybe look at installing "turf stone" pavers in my potholed parking strip…

Wait projects for the truck, not with the truck!

Just general maintenance: Plugs, Wires, Fuel Filter and new Rotors next week. A week or two later will be a pair of transmission fluid changes (upgrade to Mobil 1 synthetic ATF) with a new filter and fresh fluid for the transfer case.

Aside from that, probably just try to keep it clean between those other projects!

__________________
2003 Edge 4x4 Sonic Blue 4.0 SOHC, Auto, 4.10 LSD, 4-door Supercab

really been looking for a cheap air compressor n the money to buy it at the right time,theres a pancake one for $45 im looking at neumatic tools for the truck n around here are pretty cheap n need a hammer type wrench gun for some older bolts on the truck like the rusted seat bolts.And some new better wax or some of the stuff other guys on the forum do for detailing their rides with neumatic buffer at least try to improve my 24 year old pelling clear coat :LAUGH;Then the other upkeep ya gotta do n oh! alotta fishing catching those big ol channel cat's at night.

__________________
1987 black custom xlt,ext. cab 4x4,military-surplus 2.9L, stock 3"lifted;5 speed auto trans w/ manual 4x4,borg-Warner-turbo transfer case,grinds out progressive aluminum mags w/goodyear wranglers; keyed entry alarm,duel 280w interface deckw/usb n bluetooth,jvc6x8s rear,jvc4"160wfront,crome bed side rails,tuff liner bed liner also blacked out headlights,limo black window tint. called the BULLSNAKE cuz its the best small-n-toughest 4x4 ford built!!

Rims/tires, exhaust, pull fenders, and a mid travel kit for now, might not all get done over summer since it sits all summer usually but its getting there!

__________________
2004 v6 3.0 2wd

Pull dents out of roof, fenders, quarters, doors and tailgate then paint. Install flairs and maybe some new wheels. Maybe not though and I have begun to llike those cheap ass steel xl wheels.

__________________
2002 XL 5.0 with T5
Reparied or Replaced just about everything.

summer project is already underway! 1st step, crank t-bars next it to block the read or add some springs...havent decided yet. not going crazy, but would like the rear level with the front.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

I am probably going to install a do it yourself bed liner, tint the windows, put on stepbars, and an Autobot symbol on the back window

__________________
http://www.threadbombing.com/details.php?image_id=1688