So I now have my bare metal bumper and winch on the way.
I now have to make decision as to color/paint selection.
The bumper will be bare metal upon arrival. Didnt want powder coat as nothing else is coated.
The option I am considering are;
a. Paint using color match shadow greay and maintain orig scheme.
b. Spray Using undercoat. Then paint color match.
c. Spray using just underocoat. If I do this I also want to spray all of the grey, rear bumper, and roll bar.
Tried doing this on pc but cant figure out how...
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
sliders, suspension lift, rear bumper, tire carrier, tailgate