|
|
|
|
01-20-2011, 07:04 AM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Truck Train Horn Set-up
So I got this for xmas and finally opened the box. lol
This is a 120psi 2 or 4 horn, I have two but if I install it will be hidden anyway. Therefore 2 horns better than 4.
I wasnt going to install it or the siren/pa because I didnt need trouble and a yellow truck sticks out enough already. But I decided to order a set of missle style toggles that will be in my center console. Without arming them nothing will work..
Heres alook at the tank and compressor as well as horns.
This setup doesnt require oiling compressor or being mounted level.
Here is pic with advil bottle to give you idea of size.
Toggles not hear yet but they will be similar to these ebays;
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
|
|
|
Register and never see these ads again. |
|
01-20-2011, 09:03 AM
|
|
Roll Tide
|
|
Join Date: Jun 2010
Posts: 732
|
|
Re: Truck Train Horn Set-up
Nice.
__________________
20O3 extended cab, 2wd, silver, 3.0, toyo spectrum tires, 10,000k HID's, 8' in bazooka tube, and UWS toolbox
|
01-20-2011, 09:05 AM
|
|
4.Pro
|
|
Join Date: Jul 2010
Posts: 569
|
|
Re: Truck Train Horn Set-up
You will probably need that advil when you test em out. Those look pretty stout.
If you don't mind me asking, how much was it?
__________________
91' Ford Ranger 4.0 Custom
Let's just say it's not stock
|
01-20-2011, 09:26 AM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Re: Truck Train Horn Set-up
Friend gave em to me to test this new setup he has.
Believe complete set with all wiring is 200plus shipping.
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
01-20-2011, 09:29 AM
|
|
troll extraordinaire
|
|
Join Date: Jun 2009
Posts: 635
|
|
Re: Truck Train Horn Set-up
You don't need those things. It's just gonna get you tickets. Quit while you're ahead and cut me a steal on it.. lol
GB
__________________
2001 Edge Regular cab, auto 4.0L 4x4 4.10LS 8.8
1987 standard cab w/92 5.0/T5Z 31 spline 8.8 w/Torsen
1989 Regular cab longbed, manual 2.9 4x4 - Parts BroncoII's x 3
|
01-20-2011, 09:50 AM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Re: Truck Train Horn Set-up
Also have siren/pa now lol
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
01-20-2011, 11:19 AM
|
|
~+!)@(#*$&%^
|
|
Join Date: May 2009
Posts: 3,033
|
|
Re: Truck Train Horn Set-up
PAs are fun. The siren...meh. Fun at shows and off roading or if you are ever lost/stuck on a trail!
----------
I have some boat horns I am still trying to find a spot to mount on my civic...
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|
01-20-2011, 03:48 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Re: Truck Train Horn Set-up
Ya this was stuff i expressed interest in then had tossed at me so I will try it out.
He even offered me dash lights lol.
I mostly want the pa. If I get cb it will rebroadcast over louspeaker if i want too also.
Tried horn in house lol, -40 so brought in a batterie and let her rip.
This is gonna be fun...lol
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
01-20-2011, 03:50 PM
|
|
troll extraordinaire
|
|
Join Date: Jun 2009
Posts: 635
|
|
Re: Truck Train Horn Set-up
That's what a PA is. It broadcasts over a loudspeaker.
GB
__________________
2001 Edge Regular cab, auto 4.0L 4x4 4.10LS 8.8
1987 standard cab w/92 5.0/T5Z 31 spline 8.8 w/Torsen
1989 Regular cab longbed, manual 2.9 4x4 - Parts BroncoII's x 3
|
01-20-2011, 04:04 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Re: Truck Train Horn Set-up
Yes but some have rebroadcast. This allows you to have the cb, or vhf fed though also..
Thats how it was explained to me anyway..
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
01-20-2011, 04:05 PM
|
|
Get Lifted.
|
|
Join Date: Nov 2010
Posts: 6,402
|
|
Re: Truck Train Horn Set-up
These are so bad ass!
__________________
YZ the way to be!
The Brotherhood!
Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011
|
01-20-2011, 04:52 PM
|
|
I love my truck
|
|
Join Date: Sep 2010
Posts: 1,528
|
|
Re: Truck Train Horn Set-up
Wish I had one of those. Where are you going to mount it?
__________________
2002 Mazda B3000 3.0L V6 4X4 | 2010 F-150 | 1990 Jeep Commanche 4.0L |
Mods:
off road lights | back up lights | auxiliary bed lights | interior LEDs | rhino liner | John Deere mudflaps | fog light mod | air box mod
Mustang dome light | Explorer OHC | Rampage LED brakestrip | maxed t-bars | Dixie horn | painted interior accents | undercoating | Cooper Discoverer AT3s
Mods to come: louder exhaust
|
01-20-2011, 05:22 PM
|
|
Sunny Soonkyu <3
|
|
Join Date: Aug 2009
Posts: 4,419
|
|
Re: Truck Train Horn Set-up
Nice, hopefully with my tax returns (depends on how much I'm getting back) I want to get some Train horns and a PA system from hornblasters and some underglow and a Ultra Gauge
__________________
Sunny
2002 Ford Ranger Edge Flex Fuel 2wd
LED Crazy!
Complete Pioneer Audio setup
5000k HID Projector retrofit and 3000k Fogs
Achilles Desert Hawk 255/45/20 with 20'' rims
Looking for a professional retrofitter? Send me a message!
|
01-20-2011, 05:34 PM
|
|
Ford Ranger Driver
|
|
Join Date: May 2010
Posts: 501
|
|
Re: Truck Train Horn Set-up
I am planin on hiding it all uner the bed. Looks nice and compact and i want it hidden. Will do a step by step when i do install...
__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate
|
01-20-2011, 05:36 PM
|
|
In Memory of Jason Finn
|
|
Join Date: Jul 2010
Posts: 748
|
|
Re: Truck Train Horn Set-up
Just gave me an idea for my tax returns if I dont decide to buy another gun
|
Thread Tools |
Search this Thread |
|
|
|
|