got some vent visor things and trying to put them in but they seem way to big! they say they should ft 93-05 or 03 but its to long. it goes on the inside of the weather stripping. the brand is JDM. what should i do?

Goes from the very bottom of the window by the mirror to the end up at the top of the window.

U got any pics of how long it is up on the window?

__________________

let me go get some pics

----------

I believe once you pull the tape off and stick it into the weather strip. It will go up into there like it is suppose to.

If I recall mine were the same.

__________________

but the part in the side mirror, it just sticks in there funny and doesnt really seem like it will be in there very good. i can see it popping off and thn when i roll up the window, the window will try to get on the other side of the visor and break it. if it went like this i see i break it cus he window should be against the fuzzy part but the vent thing is to weird.

They should fit, try popping them in more, rock it if need be

i can get them in all the way but the side mirror thing is about to break and then the visor is squished in there like that last pic i did in previous comment

did you unbolt the mirror to loosen it so you can slide it in?

no it just goes in there but makes the plastic piece on the mirror pop out which pushes the visor inwards

Here is how mine is. Why not pull the tape and install and if it doesn't work take it back?
You could probably even trim some of the lip off the visor to make it smaller.

__________________

i allready did trim some of the mirror, just weird that i would have to do this to get these stupid things in haha. i guess ill try and then put the window up and keep it up for a while so it can stick, but just doesnt seem like the sticy part will hit anything to stick so it just dangle there

Try to loosen the upper bolt for the mirror to relieve it a little

but i have to take off my door panel to get to that right? i dont see any bolts on the outside of it

correct, its a sinch popping them off, total of 4 screws thats it.

ill just take the tape off and see what happens

----------

well im pretty sure this is the bran dthey selll at autozone and im going to ace hardwere to get some silicne adhesive for headlights, so ill just stop by autozone and see if they have anything to say about it, if not, i punch them in the face!