Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 10-05-2018, 09:01 PM
leothelyon leothelyon is offline
Learning to use the forums
 
Join Date: Oct 2018
Posts: 2
Default 1990 Ford Ranger Rattling noise.

Hi everyone
I have a rattling noise when I depressed the clutch. The sound comes from the transmission area. After much searching, I was led to believe the noise is coming from the throwout bearing or the clutch slave cylinder. I have the old part out but can't duplicate the rattling noise when I spin the bearing but the new bearing is much more solid, tighter spin. I replaced this part and the clutch assembly Feb 2014. My concern is, before I put everything back together, should I check something else that may have caused the rattling noise. I have the transmission out about 8 inches where I could remove the cylinder but have learned too late, all I needed to do was replace the bearing only and not disconnect the line. I think my problem is solved.
Leo
__________________
1990 Ford Ranger 4-2
Reply With Quote
  #2  
Old 10-09-2018, 02:21 PM
leothelyon leothelyon is offline
Learning to use the forums
 
Join Date: Oct 2018
Posts: 2
Default Re: 1990 Ford Ranger Rattling noise.

Hi
I need torque specs for clutch slave cylinder inside bell housing of transmission. Autozone did not have them. Local dealership didn't want to help me, said guy was too busy. Ford Motor company didn't know or where to direct me. Called a second dealership, man says the two bolts on slave is 13.9 while the bolts for the bell housing is anywhere in the range of 38 to 51 newts which converts to 28 to 38 ib/fts. Can someone here confirm or correct? I'd like a second opinion or a better source. Like I said in first post, I did this work in 2014 but don't know where I got the last figures or where I recorded the numbers.. Thanks Leo
__________________
1990 Ford Ranger 4-2
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rattling noise from down under vinchez78 4-Cylinder Tech 1 03-18-2016 04:09 AM
Rattling noise in 4wd. Cause? Tretnine 4.0 SOHC / 4.0 OHV Tech 4 10-30-2014 07:39 PM
Ranger making rattling noise on upshift from 1st to 2nd r4ngerdanger Introduce Yourself 3 08-16-2014 04:17 AM
Rattling noise from bed?? gregbj33 General Tech 10 07-21-2012 10:19 AM
would 1990 JEEP wheels fit 1990 ford ranger 4x4? bears4ever Wheels and Tires 3 11-30-2008 08:02 AM