Re: Anyone ever replace their bumper brackets?
Looks like you could put longer bolts from the bumper, through the brackets and tighten up the slack. Pulling the top of the bumper up to the bottom of the grill.
Top picture: the bracket is bent back. That nut and bolt right in front of it is where the bracket should bolt up. Remove the bumper and bent your bracket to close the gap so you can get the bolt through the hole.
__________________
I ask the dumb questions so you don't have to.
2001 2wd swb Ranger EDGE. 3.n0 with 5 spd. Bare bones.Very simple but tough truck.
MODS: '93 Lincoln Town car wheels: Explorer seats and center console. More to come...
Build thread comiming soon .... when I get a donor
Last edited by Ranger850; 09-30-2018 at 06:29 PM.
|