Hello Everyone,

I just picked up a 2000 Ranger and the emergency brake doesn’t work. When I depress the pedal, it doesn’t move all that much.

Here is a pic of what the cable bracket looks like,I feel something is missing.

Any help is greatly appreciated.C7C81C30-8236-4FCB-99A9-E57AD2A5DBFC.jpg

The cable is probably seized. Looks fine in the picture but that doesn’t mean it’s good. Also remove the drums and check the hardware. Make sure everything is working properly. The cable is supposed to look that way, it’s the pain in the ass 3 piece Y shaped cable.


Sent from my iPhone using Tapatalk

__________________
2011 Ranger XLT 4x4 3.73 8.8" Trac-lok #1 T-bars, K -springs, LineX bedliner, General Grabber AT2's, Tonnopro tri-fold, CoverKing Realtree AP seat covers, OEM pre-keys, axle spacers, Bilstein 4600's, Hellwig AAL. Ziebart Undercoat
'98 Ranger XLT 2WD (sold)

^^ What he said....

__________________
_______________________

My Build Pg. Threads
+ 93' Ranger Overlanding Build
+ 94' Ranger Bed Overlanding Trailer Build
+ 12° North Industries ~ I Support

He is correct, I had a similar issue with my 04 ranger, a replacement of drum hardware corrected my issue though

Sent from my SM-N950U using Tapatalk

Fluid Film it way better than any PB or WD. Its fun getting it out . just measure it before ordering replacement so many lengths

__________________
Charlie
Dont fix it unless it's broken or you really bored
2000 Ranger XLT 4X4 4.0 now 5 speed manual trans

1993 Ranger XL 4x2 3.0l Auto