Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 12-01-2017, 07:21 AM
joeturse joeturse is offline
Learning to use the forums
Join Date: Sep 2011
Posts: 4
Default Brake Lines

Need to replace all brake lines on my 2000 Ranger.Anyone know of a kit for my truck.
Reply With Quote
Old 12-01-2017, 08:25 AM
Craigslist is awesome
Join Date: Jun 2016
Posts: 557
Default Re: Brake Lines

No "kits" per se and lengths are different for regular cab short bed, regular cab long bed, extended cab short bed.

There were some options as far as no anti lock, rear anti lock, 4 wheel anti lock that changes the front line length and fittings.

The absolute easiest way if you intend on doing it yourself would be to buy a roll of copper brake line, buy the individual fittings, buy or rent a double flaring tool (please note the double your life is on the line here) and do the lines one at a time.

The copper brake line bends so much easier and is a pleasure to work with.

If you are not familiar with flaring and bending then please have a reputable brake shop handle this.
00 XLT 4WD XCSB 4.0 my new baby
00 XLT 2WD RCSB 5.0 swap in progress.
98 XLT 4WD XCSB 4.0 dead
99 EXPO donor motor for dead one and parts for the others.
Newest Ranger Forum
Reply With Quote
Old 12-23-2017, 06:14 PM
Mike69 Mike69 is offline
Another old fart
Join Date: Oct 2013
Posts: 7,158
Default Re: Brake Lines

When I had to replace the line going to the rear of my 2000 Ranger I used NiCopp brake line, very easy to bend & flare. I purchased a good flaring tool & a roll of line & the fittings & made my own line.

This is the kit I purchased from Jegs to do my brake line.

Just be aware that depending on the line you need to replace you may need to do more if it will not come apart due to the trucks age & the amount of road salt it has encountered, & seeing as you are from NJ it probably has had its share. When I did the rear line on my Ranger I ended up replacing the flexible line to the rear axle housing, the 2 lines to the wheel cylinders, & both rear wheel cylinders because it was all rusted together.
2000 Ranger Extd Cab XLT, 4X4 Off Road, 4.0L, Auto, 8.8 - 4.10's, 01 grille & lights swap. (My DD)
Build thread
69 Mustang(project) 5.0, T-5, 9" rear.
Build thread
99 Explorer Sport, 4.0 SOHC, Auto, 8.8 - 4.10's, PW, PL, PM, Cruise, Tilt. (Wife's DD)
Build thread

Last edited by Mike69; 12-23-2017 at 06:18 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Brake lines Paul4x4 General Tech 4 10-31-2013 01:21 PM
Help with brake lines! ext94cab General Tech 2 04-14-2013 04:05 PM
brake lines fmx4lif3 Wheels and Tires 8 03-27-2012 06:40 PM
Brake lines 02duvalranger Lifted Suspension 2 03-09-2012 05:06 PM
Brake lines Freemans 00 Exterior Tech 2 01-21-2012 07:47 PM