Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-16-2017, 11:28 AM
NewShockerGuy NewShockerGuy is offline
2001 XLT
 
Join Date: Oct 2011
Posts: 1,214
Arrow Fuse/Relay panel under hood doesn't match manual?

Super confused and hope this isn't a stupid thing to ask... For whatever reason I was poking around the under hood fuse/relay panel and then looking at the manual and it appears that I am missing stuff. Which is weird because my truck runs but there are things missing like the fuel pump relay?

I have taken some pictures.
I also numbered a couple things according to the picture of the manual.
Is this normal??

According to the manual relay 45A/B are wiper hi/low and wiper park/run
I have those. but if you look beside it there are two more relays

46A states it's not used yet the picture shows an outline of a relay, and I have a relay there... then below it 46B is the front washer pump.

I have question marks on those because if you look to the right of the picture I have two larger relays which don't match up to the diagram at all??

It appears 47A/B and 48A/B should be smaller relays. but it doesn't appear to match anything.

49 Relay on the manual shows the Full Starter but in my panel I don't have that?

Then to the right of the manual 48A/B show the smaller replays of Fog lamps and Fog lamp relay. My truck didn't have that via the factory so I get why those aren't there.

50A/B should be in the far right corner and smaller relays. 50B states fuel pump. Yet I don't have that at all? How could I not have a fuel pump relay? Seems odd as hell to me?

Another question is fuse 43. It's bright red and has a picture of 6.9 ohms? What is this? The manual shows that 43 is not used so should I remove that.

Totally confused and hopefully someone can shed some light. I hope these aren't stupid questions but it just seems really odd that the manual isn't lining up with the truck?
Any more pictures that are requested just let me know and I'll go out and snap some more pictures for clarity...etc.
2001 Ford Ranger XLT 2.3L

Thanks,
-Nigel
Attached Images
File Type: jpg 20171116_124513_resized.jpg (95.0 KB, 12 views)
File Type: jpg 20171116_124535_resized.jpg (98.5 KB, 9 views)
File Type: jpg 1.jpg (98.8 KB, 9 views)
File Type: jpg 2.jpg (84.5 KB, 6 views)
File Type: jpg 3.jpg (97.5 KB, 6 views)
__________________
_____

2001 Ranger XLT 2.3L Auto: Bunch of misc mods.
Little lift: 4" Spindle Lift w/ 2" shackles and 2" oem blocks.OEM Ranger Sport Wheels: Tires=245x75x16

~NSG~
Reply With Quote
  #2  
Old 11-17-2017, 12:19 AM
Undrstm8ed Undrstm8ed is offline
Habenae Est Dominatus
 
Join Date: Apr 2013
Posts: 1,862
Default Re: Fuse/Relay panel under hood doesn't match manual?

Where is the lid to that fuse box, and either your owners manual is adaptive for ALL VERSIONS of your truck and you may be just on a wrong page or thats not the correct manual for your vehicle.
__________________
_______________________

My Build Pg. Threads
+ 93' Ranger Overlanding Build
+ 94' Ranger Bed Overlanding Trailer Build
+ 12 North Industries ~ I Support
Reply With Quote
  #3  
Old 11-17-2017, 08:16 AM
JAMMANICA JAMMANICA is offline
Craigslist is awesome
 
Join Date: Jun 2016
Posts: 557
Default Re: Fuse/Relay panel under hood doesn't match manual?

Quote:
Originally Posted by NewShockerGuy View Post
Super confused and hope this isn't a stupid thing to ask... For whatever reason I was poking around the under hood fuse/relay panel and then looking at the manual and it appears that I am missing stuff. Which is weird because my truck runs but there are things missing like the fuel pump relay?

I have taken some pictures.
I also numbered a couple things according to the picture of the manual.
Is this normal??

According to the manual relay 45A/B are wiper hi/low and wiper park/run
I have those. but if you look beside it there are two more relays

46A states it's not used yet the picture shows an outline of a relay, and I have a relay there... then below it 46B is the front washer pump.

I have question marks on those because if you look to the right of the picture I have two larger relays which don't match up to the diagram at all??

It appears 47A/B and 48A/B should be smaller relays. but it doesn't appear to match anything.

49 Relay on the manual shows the Full Starter but in my panel I don't have that?

Then to the right of the manual 48A/B show the smaller replays of Fog lamps and Fog lamp relay. My truck didn't have that via the factory so I get why those aren't there.

50A/B should be in the far right corner and smaller relays. 50B states fuel pump. Yet I don't have that at all? How could I not have a fuel pump relay? Seems odd as hell to me?

Another question is fuse 43. It's bright red and has a picture of 6.9 ohms? What is this? The manual shows that 43 is not used so should I remove that.

Totally confused and hopefully someone can shed some light. I hope these aren't stupid questions but it just seems really odd that the manual isn't lining up with the truck?
Any more pictures that are requested just let me know and I'll go out and snap some more pictures for clarity...etc.
2001 Ford Ranger XLT 2.3L

Thanks,
-Nigel
Unusual.

Is that a ford EVTM for a ranger? LOL.

If it is an EVTM mine has different diagrams for the different motors, and usually has the diagrams for the most amount of accessories per model meaning everything it could be ordered with.

Mine has stuff missing also but not the fuel pump.

What manual is that?
__________________
00 XLT 4WD XCSB 4.0 my new baby
00 XLT 2WD RCSB 5.0 swap in progress.
98 XLT 4WD XCSB 4.0 dead
99 EXPO donor motor for dead one and parts for the others.
Newest Ranger Forum
Reply With Quote
  #4  
Old 11-18-2017, 12:41 AM
NewShockerGuy NewShockerGuy is offline
2001 XLT
 
Join Date: Oct 2011
Posts: 1,214
Default Re: Fuse/Relay panel under hood doesn't match manual?

Forgot to update. Apparently the manual is wrong. I found the exact fuse box/list online via google search and it matched with mine exactly. On the front of the users manual that I have it states 2001 Ford Ranger. So not sure exactly why it doesn't match up... quite odd.

After checking online:
http://www.autogenius.info/ford-rang...e-box-diagram/

That's the one that matches with what I have.

The lid on the fuse box was off so I could snap the picture.

quite strange.

-Nigel
__________________
_____

2001 Ranger XLT 2.3L Auto: Bunch of misc mods.
Little lift: 4" Spindle Lift w/ 2" shackles and 2" oem blocks.OEM Ranger Sport Wheels: Tires=245x75x16

~NSG~
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why doesn't my rear axle code match with bearing and seal part numbers? BlackIce06 Drivetrain Tech 2 03-13-2017 05:16 AM
Pic of fuse box with driving/fog light relay??? se3388 Electrical Tech 12 03-17-2015 08:12 PM
'02 10A blower motor relay fuse keeps blowing - up'd tp 15A fuse and blew that too drewglenn04 Electrical Tech 12 07-02-2012 12:18 PM
Car doesn't start when Fuse 26 is in??? Jiggystyle Electrical Tech 13 12-14-2011 01:55 PM
Blows starter relay fuse....sometimes hdhoosier Electrical Tech 0 01-05-2010 03:05 PM