Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 09-09-2017, 03:48 PM
mike93 mike93 is offline
Liking the Ford Ranger Forum
 
Join Date: Dec 2011
Posts: 17
Default P0141 help

My 99 ranger 3.0l keeps throwing p0141 I found corroded wire on the old oxygen sensor so I replace and it still keeps throwing the code I run power through all the wires that go to the oxygen sensor to make sure that the wires are not broken. Have battery power at pin #1, ground at pin #2 and #3 and 6.2volts ground at pin#4 any help would be greatly appreciate it
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
P0141 please help!!! Jm0 4.0 SOHC / 4.0 OHV Tech 6 05-02-2015 11:42 AM
05 RANGER 3.0l P0141 & P0161 CEL Sharpshot77 3.0 Vulcan Tech 0 08-15-2014 11:06 AM
P0136, p0141 SR2K Interior Tech 4 11-05-2013 05:00 PM
P0141 code. ThemanOdis General Tech 6 07-19-2012 04:29 AM
3.0 P0141 & Cyl 5 Misfire. HELP Imped 3.0 Vulcan Tech 2 01-31-2012 12:38 PM