I would like to see any tires 31 and up on a 4 cyl I really would like to see anyone with 35 I am thinking of putting 33s on a new 4cyl I will be getting soon. But I cant help but want 35s because they just look so much beefier ..so please post your pics

__________________
Stock 2002
With 4.0 motor
4wd
32x10.50 treadwright Claws

31's or 35's for that matter will look the same on a V6 as they do on a 4cyl......

Click:
Ranger Wheel Reference Page
Lets see your Lifted Ranger

__________________
Curent 2003 Ford Mustang Mach 1 owner - Build Thread for her: Logan's 2003 Mach 1

Former 2003 Ford Ranger owner - Build Thread for her: Project Budget Buster

obviously you didn't read OP. Clearly he wants a picture of 35 inch tires sitting on the engine bay.

__________________
1996 ranger 3.0 extended cab 2wd straight shift SOLD 6/13/15

2003 f150 4.2 regular cab 2wd straight shift still in the driveway

1998 f150 4.2 regular cab 2wd automatic daily driver

Lol more so wondering if anyone has. Put 35s on a 4 cyl and if so I'd like to see

__________________
Stock 2002
With 4.0 motor
4wd
32x10.50 treadwright Claws

I understand the question about wondering if anyone has put 35's on a 4cyl - but I don't understand the wanting a picture part.......

Pretend this Ranger on 35's has whatever engine you want it to have:



Or this one:



Or this one:

__________________
Curent 2003 Ford Mustang Mach 1 owner - Build Thread for her: Logan's 2003 Mach 1

Former 2003 Ford Ranger owner - Build Thread for her: Project Budget Buster

^^^ engine size doesn't matter how the truck looks with 35s on it.

__________________

Why not put size 17 Magic Johnson's on a 2-year-old...makes about as much sense, and I bet the 2-year-old could get off the line and up to speed faster.

What tmcalavy said !

OK lol once again a 2wd 4 cyl and a regular cab and that looks different also I would like to see there set up like amount of lift and all that..but anyway just ignore it has anyone put 35s on a 4 cyl?

__________________
Stock 2002
With 4.0 motor
4wd
32x10.50 treadwright Claws

You. Are. Not. Making. Sense.

Hell, the shoes would weigh more than the kid!!

__________________
99 Ford Ranger XLT regular cab stepside 2.5l 4 cyl. automatic Fiberglass Custom brand 6' bed cap.

Anyone can bolt up 35s to a 4 cyl. Can it turn them without messing up clutch or tranny? is a different story buddy.

A 4 cyl with 35s will be slow. And a regear is a must something in the 5.13 range... also you gotta have new wheel bearings for the added stress and the tranny and diff will hate you if it has stock diff gear ratio.

__________________
2010 2.3 Stick Reg Cab XL - Maxtrac 2 inch coils - Bilstein 5100 front shocks - Bilstein yellow rear shocks

It's all about the gearing! And a proper lift kit of course. Like many say, just because you can doesn't mean you should,, shit I'd love to be running 35's on my truck without doing the proper changes. If you're going to do it, go ahead and do it right. Regear your truck.

I will probably just run 33s with 4.56 ..anyone have experience with boggers?

__________________
Stock 2002
With 4.0 motor
4wd
32x10.50 treadwright Claws

Personally I wouldn't even put 33" on my 4cyl. I have stock tires and that barely gets it going.

__________________
2007 Regular Cab - 2.3 DOHC - 5 Speed Auto - 4.10 Gears - Maxtrac 7" Lift - Fiberwerx 3" Fenders - Bilstein 5100 Series - 15x10 Ultra 164's - 35x12.50x15 Red Letters - Custom dents