|
|
|
|
03-27-2014, 04:51 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
ORI Baja Eliminator
So after waiting about 2 weeks for my lightbar it finally came in today. Just wish the 60 dollar shipping wasnt included haha.
Heres the box it came in
all wrapped up
Drill died so i was just sitting here waiting for it to charge back up
and finally heres she is mounted
Just showing how far it sticks out.
Ok im not gonna lie, the install was a huge pain in the ass. Ok drill the holes was easy enough. Its just the fact that once you drill and pull the bolts through. You have almost no room to even get the nuts on and tighten em down. My hands are pretty cut up from trying to squeeze my hands through the small amount of work room. All in all, was worth it and im happy with it ha. Ill mount some fogs soon enough
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
Last edited by 2wdMuddin; 03-27-2014 at 04:55 PM.
|
|
|
|
Register and never see these ads again. |
|
03-27-2014, 05:27 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2009
Posts: 3,273
|
|
Re: ORI Baja Eliminator
coolness. im all about corded tools. nothing makes me more upset then having to wait for a drill to charge.
|
03-27-2014, 05:36 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
Re: ORI Baja Eliminator
Quote:
Originally Posted by stephen
coolness. im all about corded tools. nothing makes me more upset then having to wait for a drill to charge.
|
Im the same, thing is the corded one broke haha. I kept getting impatient and taking the battery back and seeing how much i could drill before it died again. I did that waaaay too many times
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
|
03-27-2014, 05:47 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2009
Posts: 3,273
|
|
Re: ORI Baja Eliminator
how many holes is that? looks like a lot of drilling.
|
03-27-2014, 06:07 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
Re: ORI Baja Eliminator
Quote:
Originally Posted by stephen
how many holes is that? looks like a lot of drilling.
|
just 4
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
|
05-28-2014, 08:24 AM
|
Learning to use the forums
|
|
Join Date: Mar 2013
Posts: 7
|
|
Re: ORI Baja Eliminator
Looks good on your truck. I got mine in yesterday and just unboxed it last night but haven't gotten to even match it up to my bumper or lights yet. (work gets in the way sometimes...) I didn't see any installation instructions with it. I think it is probably obvious but thought I'd ask if you had any or if you can share how you went about mounting yours, any gotcha's other than the lack of space behind the bumper, etc. I would appreciate any words of wisdom you might have.
Thanks!
__________________
fergy, Kyle TX
04 Ranger 4.0
|
|
|
|
05-28-2014, 08:41 AM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
Quote:
Originally Posted by fergyfer
Looks good on your truck. I got mine in yesterday and just unboxed it last night but haven't gotten to even match it up to my bumper or lights yet. (work gets in the way sometimes...) I didn't see any installation instructions with it. I think it is probably obvious but thought I'd ask if you had any or if you can share how you went about mounting yours, any gotcha's other than the lack of space behind the bumper, etc. I would appreciate any words of wisdom you might have.
Thanks!
|
I bet you just loooved the shipping fee too huh lol. What I did was put the bar on your truck and make sure its all even on both sides. I just guesstimated using the license plate and marked it. After that I used a pencil to outline the mounting bolts and that was that. Next step is where you separate the men from the boys haha. Start drilling. If a 17 year old highschooler can do it, anyone can lol. Other things besides lack of space i had was lack of tools. My drill bit was a tad too small. Make sure you also make the hole a tad bit bigger than the bolt. You want some wiggle room. Paint over holes to prevent rust and thats it. Good luck man
----------
Oh yea dont forget to put som eds big ass fogs on the bar too haha.
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
|
|
|
|
05-28-2014, 09:13 AM
|
Learning to use the forums
|
|
Join Date: Mar 2013
Posts: 7
|
|
Re: ORI Baja Eliminator
Yeah, shipping was a little steep for sure. Tools shouldn't be a problem for me as I have plenty since a man never gets rid of tools and at my age, let's just say I've collected a few. On the install, I figured I'd just eyeball it holding it against my bumper and mark the holes. Sounds like that's kindof what you did.
I already have a set of ProComp 7" HID spots that I hope I can cram in there. I'll throw a photo or two up on here once I get it done. Thanks again!
__________________
fergy, Kyle TX
04 Ranger 4.0
|
05-28-2014, 09:58 AM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
No problem man. Ive got hella 500s and I feel like theyre a bit small lol. My 32s came in today btw! Ill post a pic of that up hopefully whenever I get em on haha
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
|
05-28-2014, 10:07 AM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2012
Posts: 9,686
|
|
Will one of these work on a 97??
image-1765422834.jpg
Fronts to plain! And needs lights!
__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!
|
05-28-2014, 04:11 PM
|
|
Sold this bish, no regret
|
|
Join Date: Jul 2011
Posts: 4,633
|
|
Re: ORI Baja Eliminator
I almost bought one of these in January but went with the Westin light bar instead. Now I regret that decision. Looks really good on there.
__________________
2002 Blue Edge <-- Retired off road toy
3.0 Automatic, 2wd, 4:56's, 35x12.5 Kuhmo's, Lifted 2x, and more. TOTM July 2015
2002 Jeep TJ <-- NEW off road toy!
2.5L 5-spd, Skyjacker 4.5", 4:56's, Aussie Lockers, 33x12.5's, and more.
Build Thread --> http://www.fordrangerforum.com/proje...blue-edge.html
Youtube --> https://www.youtube.com/user/smashlizard
|
05-28-2014, 05:10 PM
|
|
Ford Ranger Driver
|
|
Join Date: Mar 2013
Posts: 562
|
|
Re: ORI Baja Eliminator
Quote:
Originally Posted by 02BLUEdge
I almost bought one of these in January but went with the Westin light bar instead. Now I regret that decision. Looks really good on there.
|
Yea i almost went the bullbar route. Im happy with how it turned out
----------
well i got my 32s on today! My excuse for posting is showing the lightbar with fogs on lol
__________________
2005 XL 2.3 (duratec), 15x8 American Racing Baja wheels, BFGoodrich 32x11.50 all terrains, 4.10 open diffs, CB/PA, ORI Baja Eliminator Lightbar(sold), Hella 500 Foglights, Fabtech upper control arms, camburg coil springs, Maxtrac "4" inch spindles and shackles, 32 inch Bfgoodrich AT's, Spyder Halo Headlights, custom rear tube bumper with integrated hitch, custom front prerunner bumper with skidplate, roadrunner fiberglass front fenders, pulled bedsides
|
05-28-2014, 07:37 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2009
Posts: 3,273
|
|
Re: ORI Baja Eliminator
Fabtech > ORI
|
|
|