Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!
FRF Store Register Ranger Pictures Community Today's Posts Search

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-11-2013, 10:15 PM
adamgreen89 adamgreen89 is offline
LazyDaze619
 
Join Date: Jun 2011
Posts: 15
Default How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

I need to replace the metal panel or "fender" on my 2011 ford ranger stock 2.3L 4 cyl. Has anyone done this before? any info will help
__________________
White 2011 Ford Ranger, 5 speed manual transmission, 2.3 Liter, 4 cylender engine, Extra Cab, I-Trip, Sector 9 sticker
Reply With Quote
  #2  
Old 06-12-2013, 01:29 PM
SpeedNinja SpeedNinja is offline
get stabby
 
Join Date: May 2009
Posts: 212
Default Re: How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

The bedside? You'll need to buy a replacement bed side. Not sure on all the details of getting the old one off, but I know there's a ton of spot welds that you'll have to drill out.
__________________
1998 Ranger XLT x-cab 2.5L M5OD-R1 black styleside, salvage title
Reply With Quote
  #3  
Old 06-13-2013, 09:23 AM
casey.mikl casey.mikl is offline
Ford Ranger Driver
 
Join Date: Mar 2012
Posts: 9,686
Default Re: How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

Just buy a new bed cheaper and easier in the long run

----------

Keep your tail lights and get a bed from a different year truck not sure what year they started the 6 hole design in the floor but all the beds are the same, minus the older beds are held down with 4 bolts and newer are with 6
__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!
Reply With Quote
Reply

Tags
flares, metal panel, replace



Similar Threads
Thread Thread Starter Forum Replies Last Post
how hard is it to replace a rear wheel bearing? FORDSTXrunner Drivetrain Tech 8 09-05-2016 09:52 AM
How difficult to replace front passenger fender? justinae Exterior Tech 15 07-04-2012 11:37 PM
4-cyl. Ranger (or similar) with 4 wheel drive? MWDK Other Engine Tech 6 03-23-2012 06:26 AM
Replace 2011 60/40 Bench with Bucket Seats jhanks64 Interior Tech 3 01-26-2012 12:51 PM
1999 oem fender flare remove/replace Fixup1 Exterior Tech 3 12-12-2009 03:00 PM