Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-11-2013, 10:15 PM
adamgreen89 adamgreen89 is offline
LazyDaze619
 
Join Date: Jun 2011
Posts: 15
Default How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

I need to replace the metal panel or "fender" on my 2011 ford ranger stock 2.3L 4 cyl. Has anyone done this before? any info will help
__________________
White 2011 Ford Ranger, 5 speed manual transmission, 2.3 Liter, 4 cylender engine, Extra Cab, I-Trip, Sector 9 sticker
Reply With Quote
  #2  
Old 06-12-2013, 01:29 PM
SpeedNinja SpeedNinja is offline
get stabby
 
Join Date: May 2009
Posts: 212
Default Re: How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

The bedside? You'll need to buy a replacement bed side. Not sure on all the details of getting the old one off, but I know there's a ton of spot welds that you'll have to drill out.
__________________
1998 Ranger XLT x-cab 2.5L M5OD-R1 black styleside, salvage title
Reply With Quote
  #3  
Old 06-13-2013, 09:23 AM
casey.mikl casey.mikl is offline
Ford Ranger Driver
 
Join Date: Mar 2012
Posts: 9,680
Default Re: How do I replace the rear fender above the wheel well on a 2011 2.3L 4 cyl

Just buy a new bed cheaper and easier in the long run

----------

Keep your tail lights and get a bed from a different year truck not sure what year they started the 6 hole design in the floor but all the beds are the same, minus the older beds are held down with 4 bolts and newer are with 6
__________________
1997 B2300 reg cab 2.3 Lima, 15x8.5 Mickey Thompson classic 2, 31x10.50 cooper discover at3, 7.5 open 4.10 rear, dynomax super turbo catback, alpine iva-w200 w/ nav, kicker 6x8s, alpine type R 8, alpine 250W mono amp, power bass 400.4, tool box & camper shell, compustar alarm/remote start.
1956 Ford F100 rust bucket with big plans!
Reply With Quote
Reply

Tags
flares, metal panel, replace

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
how hard is it to replace a rear wheel bearing? FORDSTXrunner Drivetrain Tech 8 09-05-2016 09:52 AM
How difficult to replace front passenger fender? justinae Exterior Tech 15 07-04-2012 11:37 PM
4-cyl. Ranger (or similar) with 4 wheel drive? MWDK Other Engine Tech 6 03-23-2012 06:26 AM
Replace 2011 60/40 Bench with Bucket Seats jhanks64 Interior Tech 3 01-26-2012 12:51 PM
1999 oem fender flare remove/replace Fixup1 Exterior Tech 3 12-12-2009 03:00 PM