led underbody

d4sqd86 · #1 02-12-2010, 01:44 PM

kind of curious if anyone knows a good area to run the wires into the cab at from the underside of the truck. i dont want to cut a hole, but if it comes down to it, i will. all of the groments i can find on the truck are to small to get the end connectors of the wire thru. any ideas?

greyghost · #2 02-12-2010, 01:50 PM

lift the carpet and run them were the front body mount is on your cab.

Dcrymes99ranger · #3 02-12-2010, 01:58 PM

I wanna see photos of this done.

d4sqd86 · #4 02-12-2010, 02:00 PM

where exactly is that at? and wouldnt the seats need to be pulled out as well? hell the vinyl floor could use a good cleaning anyway, so i might just pull the seats out neway lol

big green · #5 02-12-2010, 04:35 PM

Quote:

Originally Posted by d4sqd86

where exactly is that at? and wouldnt the seats need to be pulled out as well? hell the vinyl floor could use a good cleaning anyway, so i might just pull the seats out neway lol

just pull the carpet back from under the dash. you will see a rubber big plug pull the plug out and that is where you run your wires through.

d4sqd86 · #6 02-13-2010, 03:40 PM

thanks for the input...got everything ran finally...forgot the holes that ford used to mount the factory sub setup were there, just drilled next to one to make it a little wider and filed it down to get rid of the sharp edges..ended up working perfect

olfordtruck · #7 02-13-2010, 03:58 PM

big green was spot on. The rubber drain plugs pop right out and they are plenty big. Thats where my 7 color kit runs through.