HI!... Well this weekend I decided to do the "BLINKER MOD"
on my 2007 RANGER
. As you know the newer Rangers only have a turn signal bulb in the front head light assembly. Well this mod turns the corner marker light into a turn signal as well. This mod allowing more visibility of your turn signals to other motorists.
Here's a few pics :
Here is the stock set-up from the factory on the D/S.
The BLACK/YELLOW (black wire with yellow stripe)
needs to be cut
. Make sure to leave enough wire so that this mod can be reversed if desired.
I used weather tight male/female
electrical connectors for a cleaner look plus it would be very easy to return to stock later if I wanted to. The dead end
of the wire got a opposite connector, and I simply used another connector to block
it off. I then used some shrink tubing
to make it water resistant.
Now I took the other end of the wire and tapped
it into the PURPLE/GREY (purple wire with grey strip)
. This would be the bottom
wire out of the 3 wires
on the turn signal harness with the quick clip facing up
It should look like this :
This is the finished product after everything was taped back up :