Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-03-2010, 06:46 PM
carneyboy91 carneyboy91 is offline
Learning to use the forums
 
Join Date: Jan 2010
Posts: 12
Default front fenders

are the front fenders removable on a 2000 ranger or are they welded on?
Reply With Quote
  #2  
Old 02-03-2010, 06:49 PM
ObsoleteE ObsoleteE is offline
I'm an F-18, bro
 
Join Date: Jan 2010
Posts: 1,972
Send a message via AIM to ObsoleteE
Default

I've never heard of fenders that are welded on a production vehicle.
Reply With Quote
  #3  
Old 02-03-2010, 06:52 PM
carneyboy91 carneyboy91 is offline
Learning to use the forums
 
Join Date: Jan 2010
Posts: 12
Default

i got a huge dent on my front drivers side fender and i looked how to take it off to hammer the dent out but the fender looked welded on...
Reply With Quote
  #4  
Old 02-03-2010, 06:57 PM
ObsoleteE ObsoleteE is offline
I'm an F-18, bro
 
Join Date: Jan 2010
Posts: 1,972
Send a message via AIM to ObsoleteE
Default

Are you the first owner of the truck? Anything is possible, but it wouldn't be welded on stock.
Reply With Quote
  #5  
Old 02-03-2010, 07:01 PM
carneyboy91 carneyboy91 is offline
Learning to use the forums
 
Join Date: Jan 2010
Posts: 12
Default

no its a repo and a auction truck but the red paint (factory) isn't disturbed
Reply With Quote
  #6  
Old 02-03-2010, 07:25 PM
Casper Casper is offline
Adam's > Everything else
 
Join Date: Dec 2009
Posts: 1,638
Default

there's bolts under the hood, below the lower body line and open your door and there's on there
__________________
98 Ranger some stuff done

PNW Crew
Reply With Quote
  #7  
Old 02-03-2010, 07:39 PM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,399
Default

this is from my 89 but same on your truck

10mm is the common for the top of the fender
bring a socket set though plus a phillips head screw driver.

there are 2 bolts u can only see by opening the door 2 different sizes

The screw driver is to remove the splash shield. Then there is one bolt at the door toward the ground on the outside

These pictures the bolts have been removed but they show where the location is

Plus these I circled in red I don't know how u get them I removed the whole front end before I took the fenders off[/B]




Top bolt with door open


Bottom Bolt door open
__________________
2005 Edge

Reply With Quote
  #8  
Old 02-04-2010, 01:54 AM
Smokey Smokey is offline
Senior Member
 
Join Date: Jan 2010
Posts: 597
Default

Quote:
Originally Posted by STL View Post
this is from my 89 but same on your truck

10mm is the common for the top of the fender
bring a socket set though plus a phillips head screw driver.

there are 2 bolts u can only see by opening the door 2 different sizes

The screw driver is to remove the splash shield. Then there is one bolt at the door toward the ground on the outside

These pictures the bolts have been removed but they show where the location is

Plus these I circled in red I don't know how u get them I removed the whole front end before I took the fenders off[/B]




Top bolt with door open


Bottom Bolt door open
A response within an hour?! Damn STL, PhD in HOW TO MANUALS. Whats next?!!! lol.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: 94 Ranger baja fenders and bedsides haught62 Exterior Parts 3 01-08-2010 09:03 PM
Trimming fenders ec_dago_ryder Exterior Tech 2 01-03-2010 12:00 AM
For Sale: 89' fenders hood tailgate and grille CMALI Exterior Parts 0 11-04-2009 10:58 AM
Front Tie Rod Bighomedog11 Suspension Tech 6 10-27-2009 03:15 AM
fenders FireFighter27 Exterior Tech 4 10-21-2009 01:56 PM