I've been wanting to do this for a while, but have never had time. Since it's summer I figured "what the heck" and I'm gonna try to put foglights in my bumper. Below are pictures of it, but I was wondering what kind of foglights I should be looking for, and which ones would fit best. Also what goes into the wiring for them, is it pretty tough? Thanks in advance for your help!

__________________
2009 Jeep Wrangler Unlimited Sahara Edition

I'd like to know too

__________________
2001/ 2.5/ 208,000 miles/ 5 speed/ single cab/ Suthern Comfort Conversions Kit/ kenwood head unit/ kicker door and rear speakers 6x8/ 12 inch pioneer flat box sub/ jcv amp/ blinker mod/ cargo light mod

I actually have never seen fog lights in that type of lower valance. Is the plastic in the holes removable, or does it have to be cut out?

__________________

They would have to be cut out

__________________
2001/ 2.5/ 208,000 miles/ 5 speed/ single cab/ Suthern Comfort Conversions Kit/ kenwood head unit/ kicker door and rear speakers 6x8/ 12 inch pioneer flat box sub/ jcv amp/ blinker mod/ cargo light mod

I saw someone do this before. They used a LED fog, they come square and it looks like a direct fit. I dont know the maker or anything but if you researched LED fogs im sure you could find something close.

__________________
02 Edge 4.0 4x4. 3" body and 3" block rear. 35" Falcons (STOCK GEARING...4:10), eagle 15" 180 series wheels. Flowmaster super 44. HID's. Tauno cover.

Curious on this too, I have the same valance on my 03. It looks like I have the wiring for the switch behind the radio trim. I'm hoping I could just get a trim piece with the foglight switch in it, and wire up the lights. I haven't checked yet if the wiring is there by the bumper though. I'd like to keep it as OEM looking as possible. Aftermarket switches usually look out of place and tacky to me.

__________________
03 xlt supercab 4x2 3.0 auto, level II torsen rear axle