i was wondering how hard it would be to put foglight wiring in my truck it came with foglights and the person that owned it before me toke them out and i dont see any wires for it what would i have to do to put the wiring back in it?

__________________
97 ford ranger extended cab 4X4 4.0[sold]
1999 ford f150 extended cab 4.6 3 inch body lift 35 inch tall goodyear wranglers 4X4 straight pipe
1998 ford mustang V6 3.8l automatic
mainly stock except high performance headers, performance chip,flowmaster delta 40 series muffler

you can buy 12 volt accessory kits at pep boys for like 20 bucks, thats what i used to wire my fog lights (they werent factory)

thanks smakes how hard is it to do ive got the button for it and its hooked up but the person got rid of the foglights for some reason and i dont see any wires for the foglights done by the bumper?

__________________
97 ford ranger extended cab 4X4 4.0[sold]
1999 ford f150 extended cab 4.6 3 inch body lift 35 inch tall goodyear wranglers 4X4 straight pipe
1998 ford mustang V6 3.8l automatic
mainly stock except high performance headers, performance chip,flowmaster delta 40 series muffler

it comes with instructions. has everything you need to wire lights

Look for a tan/orange (+) wire and a black (-) wire on each side. They originally dropped down from the same areas of the harness that feed the headlamps and parking lamps. If you can find and extend those wires, you should be able to keep your factory switch and wire up the fogs of your choice.

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid