Hey guys, Does anyone know what the wiring looks like going to the stock fog lights mounted to the valence? I was thinking of removing my valence after i put in my body lift cuz i don't want to really loose my tow hooks but i was wanting to us the wiring for the stock fogs for maybe a diff set of fogs mounted somewhere else. maybe pics?

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

just cut the valence a little wider to allow the tow hooks fit

__________________
1999 ranger 4x4 supercab, 4.0L
-3 inch PA body lift
-16 inch pro comp alloys
-33x11.50 BFG all terrain
-Go Rihno roll bar with 4 KC Daylighter lights
-weston bull bar
-dual exhaust,
-air box mod, tightend throttle cable.

Just locate the wires coming off the plug to the foglights

Like cody said u can cut the valence to still have ur tow hooks.

Just have to cut the valence 3" down and a little wider so u can use them

I got pictures of another ranger like that but cant post it on my phone.

__________________

Each factory fog lamp has a connector with a tan/orange hot wire and a black ground wire. It should be easy to reuse those wires for some after market fogs as long as the total wattage was kept reasonably close to stock. IIRC, the factory bulbs are about 42W each but I have 65W bulbs in mine without problems. I wouldn't risk going much higher than that.

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid

so the tan and orange ones are the positive? so if i get a fog light and it only has a positive and negitive wire how do i hook them up? i understand the negitive to negitive but wat about the positives?

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

Positive = tan w/orange stripe
Negative = black

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid

Is there any way to keep valance and tow hooks? and also the stock fog lights?

__________________
1999 4x4 xlt
4.0 v6
3inch PA body lift
2 inch torsion bar crank
1.5 inch rear shackles
32x11.50 BF Goodrich KM2 mud terrians
15x8 Cragar v5s
Dee Zee brush guard and taillight guards

Yes just notch out the valance for the hooks. And, I have my Hella 500 driving lights wired to my stock fog light wiring. It works great and makes for a clean install. Oh and There is a mod you can do that will allow you to run the fog lamp with the high beams. You have to bend a tab on one of the relays.

__________________
2003 Ranger FX4 level II. 3" BL, 33x12.50 GT Radial Mud Claws, Custom front and rear bumpers with winch hookups, custom flatbed, with hi-lift, and full size spare mount, 12,000 lb winch mounted under bed, Electric fan, and of course a flowmaster.

Can i get some input on this? maybe pics of what your talkin about?

What if i do after market fogs could i do that mod w/ them?

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

2002~2003 Ranger Foglamp Mod

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid

Oh wow cool.. Im gonna do that soon.. Now im gonna use aftermarket lamps but still the stock wiring. So that should still work right?

Now i forsure have to bend that exact prong? I'll have to hold that lil white box up to the pic to make sure i get the right one then... lol

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

yes its easy, just bend the prong back, takes 30 seconds

__________________
2003 v6 3.0
mods: blinker mod, hella 500ff's behind grille, blacked out grille, k&n intake, throttle body spacer, pioneer headunit and alpine sub w/ JL amp, 3" body lift, flowmaster super 40 dumped, police scanner, Red LED bars under dash

does anybody know if that fog light mod will work on a 05 ranger?

No, the bent pin mod is not possible with a 2005.
2004~2006 would require a minor wiring change under the passenger side kick panel.
http://www.generation-edge.info/topic.asp?TOPIC_ID=5033

__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid