I saw a picture of a ranger emblem on a guys post and he said he "acetone'd" his emblem and it turned out chrome? anyone have any imput on this? i may do it. It was in this thread: project: 06

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

calling fomoco...

stocktonite, where are yeee

what i did was used nail polish remover($1.00 at walmart) and used an old rag, dabbed some remover on the rag, and started rubbing the black off

__________________
2012 mustang premium v6 pony package
702 crew
XBGT:IKONIK MOPAR

I use the real stuff.....Acetone. Ace Hardware or True Value or Home Depot...any local hardware store will have it. I use q-tips. Here's a vid freakin' Tre decided to record me doing it. lol. Actually didn't turn out too bad.

[yt]http://www.youtube.com/watch?v=ykQNaFrjf64[/yt]

__________________
'01 XLT disguised as a '03 Fx4 Level II.

all shiney

__________________
2012 mustang premium v6 pony package
702 crew
XBGT:IKONIK MOPAR

bling bling

__________________
'01 XLT disguised as a '03 Fx4 Level II.

hellz yeah

__________________
2012 mustang premium v6 pony package
702 crew
XBGT:IKONIK MOPAR

i wander if you could do that to the small emblems

__________________
Muddin in the ranger, killin ricers in the f350

95 ford ranger 3.0 v6 side step 5 speed 4x4
mods: 6" bds sus lift, 33x12.5r15 bfg km2, expo OHC/expo power seats, full length expo console, 2 1/2" flowmaster super 44 cat back, 4 procomp 5" offroad lights, clear headlights and turn signals, 6k hid kit, 25% tint (fronts)

PNW CREW

which ones? on the tailgate?

__________________
2012 mustang premium v6 pony package
702 crew
XBGT:IKONIK MOPAR

Haha thats cool guys! thanks..


"a lil bit of bling, is never a bad thing"!!!

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

How did you go about getting the emblem off?
is it glue or pins?
(05 EDGE)

Double sided tape and a couple of alignment pins.

__________________
02 Ranger XLT 4x4 Off Road, 4.0L SOHC, Automatic, 8.8 4.10 LS, Super-Cab, 3" Body Lift, 33x12.5x15 BFG All Terrains on 15x8 M/T Classic IIs, 5K 55w Heads, 5K 35w fogs, custom front skid plate, various other goodies.

Doesn't sound like i'll be getting them off too easy.. i imagine the center will be easy but how do i get the outside edge? dont want any acetone on my truck..special tape?

Use a hair dryer and some fishing line.

The emblem in the vid was a brand new emblem, so it still had the "paper" over the sticky tape.

__________________
'01 XLT disguised as a '03 Fx4 Level II.

Does acetone work on the older style badges as well? Mine's starting to show some wear, and I was thinking of stripping them.

__________________
02 Ranger XLT 4x4 Off Road, 4.0L SOHC, Automatic, 8.8 4.10 LS, Super-Cab, 3" Body Lift, 33x12.5x15 BFG All Terrains on 15x8 M/T Classic IIs, 5K 55w Heads, 5K 35w fogs, custom front skid plate, various other goodies.