Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 01-06-2010, 08:05 AM
earnbud earnbud is offline
Join Date: Jan 2010
Posts: 272

any idea after the prep work is done how much its gonna cost me to put it on rollers or spray
Reply With Quote
Old 01-06-2010, 12:22 PM
Harleymedic53 Harleymedic53 is offline
03 Ranger xlt, 4.0L, 4x4
Join Date: Dec 2009
Posts: 416

Ther herculiner kit is 75-90 bucks. Depending on where u get it. It comes w/ two rollers (1 for first coat, 2 for second) and it comes w/ a gallon of the liner. It says it'll cover a 6' bed. Im sure there'll be a lil left over too
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.
Reply With Quote
Old 01-08-2010, 11:57 AM
dougiefresh dougiefresh is offline
Learning to use the forums
Join Date: Jan 2010
Posts: 5

well i drive a white 95 ranger, i used herculiner for the bed and hood, it has keeped up very well and i have no problume with it. if you prepare it well there is nothing to worrie about, im even going to do the rock bars and floor and plastics inside..
Reply With Quote
Old 01-08-2010, 10:15 PM
98blownranger 98blownranger is offline
Custom KeyChain R Me
Join Date: Feb 2009
Posts: 718

I am in Manitowoc not far from you, I used the Hurculiner kit was $60 on sale and did the bed of my f250 a few years ago. It is a good kit with the roller included so the install is very easy they even had a scuff pad in the kit. it holds up rather well, i know the $400 pro liners are thicker but they peel up at times also. the only thing I had ever heard bad about any kit is that the UV rays will dry out the liner. I have a bed cover so i don't worry. I heard you can get a clear UV coat... I also spray rino liner (i think that is the brand) at the shop a few times a year and that also turns out great. we use that mostly for the underside of cars/trucks but have used it in the bed also as that is the main use of the product.

Originally Posted by redrumedge View Post
98blown you should be an MD! that's the same stuff my doc asks and ur spot on man!!!
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner

lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower

custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
Reply With Quote
Old 01-09-2010, 07:24 AM
dixie_boysles dixie_boysles is offline
Joshua 24:15

Join Date: May 2009
Posts: 6,502
Send a message via Yahoo to dixie_boysles

Just print off the how-to and follow that step by step and it should turn out great. Make sure you get the cleaner it states in the how-to as well; that will make sure the liner sticks well. Rough up the surface good too!
2006 Toyota 4Runner Sport 4x4
Clarion CX501 Double Din | 265/70/17 BFG A/T | Remote Start | Tinted Windows | TRD Exhaust | TRD CAI |4.0 V6 |Tow Package | Titanium Metallic
SOLD: 2006 Ranger XLT Supercab 4x4 | The "Original Mr. Clean"
Yes I drive a Toyota 4Runner now, Yes this is a Ranger forum, get over it, the Ranger couldn't fit my child, but I do miss it.
Reply With Quote
Old 01-09-2010, 10:17 AM
RallyTruck RallyTruck is offline
Ford Truck Driver
Join Date: Dec 2009
Posts: 83

For all of you that have gone the DIY route, no offense intended. BUT......
As the owner of a spray on Bedliner shop, all I can say is, "it's not apples to apples!"

You definitely get what you pay for. I have been doing this for 15 years, and I can't tell you how many people have come to me to repair their DIY liner. If you only a few bucks to invest in a liner, then it is what it is, but in my opinion, save up and get it professionally sprayed in. You will definitley see the difference! Our warranty is lifetime across the nation. So there shouldn't be any worries. We also offer a Dupont UV coating that will keep your bed looking new for a very long time! Now, time to take off my salesman hat; just be cautious.
Attached Images
File Type: jpg Red Ranger Jan10 028.jpg (95.4 KB, 36 views)
File Type: jpg Red Ranger Jan10 029.jpg (97.4 KB, 32 views)

Last edited by RallyTruck; 01-10-2010 at 01:31 PM.
Reply With Quote
Old 01-12-2010, 11:25 AM
FX4 FX4 is offline
I make paint shine!
Join Date: Oct 2009
Posts: 842

I'm happy with my herculiner, I took my time sanding and prepping though (it took me something like 4-5 hours to prep with a palm sander, hand sanding, and cleaning multiple times)... I carry plastic boxes/drawers filled with detailing supplies, generators, and power washers all day long and there's not even a scratch in it. Here's some pics of mine:
After 1 pass of sanding:

After 2 thin coats (still wet):

After a total of 3 thin coats dried for 24 hours:

I ended up going and touching up a couple spots after it cured (like the run on's you can see on the back part...)

Close up of the texture:

my buddy has an s-10 and had his professionally sprayed in.... I guess it looked a little better aesthetically in my opinion. As far as durability I didn't see any difference though. I personally didn't see the point of spending $400+ when it can be done for about $100 and perform just the same.
2002 Ranger XLT FX4

Got new wheels? Post them here:

Last edited by FX4; 01-12-2010 at 11:31 AM.
Reply With Quote

bedliner, diy, paint

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How to: Install a roll on bedliner Korey How-To Submissions 23 02-12-2013 03:47 PM
worn timing chain RangerLuc 4.0 SOHC / 4.0 OHV Tech 7 12-06-2009 02:47 PM
4.0 timing chain rattle RangerLuc 4.0 SOHC / 4.0 OHV Tech 0 12-03-2009 07:12 AM
3.0 timing chain Ranger_EDGE 3.0 Vulcan Tech 0 11-21-2009 04:37 PM
For Sale: plastic drop in bedliner rix71gt Exterior Parts 0 11-15-2009 08:56 PM