anyone know a company that makes an aftermarket headlight that looks diffrent than a stock one mabye like euro lights or something along those lines?

go to ebay and searh 1990 ranger headlight I know I have seen something on there before

__________________

Its tuff finding a composite housing for the 1989 to 1992 ranger/explorer/bronco2. i have a 1991 and thought of changing mine as well, havent had much luck, although i did switch the bulbs over to an hid system. that made alot of difference!

__________________
"Let me try it again! I think i can get another 10 feet of air!"


MODS=
1991 extracab 2wd,full cage front to back,camburg suspension,sway away coilovers,fiberglass bedsides
,fiberglass onepiece front,33 inch tires,4.56 geared 9 inch,3.0 motor w/5 speed(soon 5.0 and c4),corbeau suspension seats,4 point harness,fuel cell,custom dash,almost 1k lbs lighter than stock,NO LICENSE PLATES!!!!!

how much did that swap cost yah roughly and is HID that blueish colored light?

the hid kit i purchased was 120$ but i found the cheap ones for around 90$ yes its kinda bluish, but when you look out your windshield, the difference is amazing. and its not blue enough to look like a Ricer.

__________________
"Let me try it again! I think i can get another 10 feet of air!"


MODS=
1991 extracab 2wd,full cage front to back,camburg suspension,sway away coilovers,fiberglass bedsides
,fiberglass onepiece front,33 inch tires,4.56 geared 9 inch,3.0 motor w/5 speed(soon 5.0 and c4),corbeau suspension seats,4 point harness,fuel cell,custom dash,almost 1k lbs lighter than stock,NO LICENSE PLATES!!!!!

Here are the ones I saw before

Ford Ranger Euro Headlights Diamond

__________________

those are clear lense with a multi shaped reflector, they are good, untill they get hit by a rock and get a hole in them, they are pretty thin material, unles you have a rock guard to put over them, the factory housing is thicker and fauceted, so it stands up to rocks. at least thats a concern in my area, we have alot of crap on the roads that gets thrown up by cars on the freeways. rock chips seem to be a yearly thing here in windshields and headlights!

__________________
"Let me try it again! I think i can get another 10 feet of air!"


MODS=
1991 extracab 2wd,full cage front to back,camburg suspension,sway away coilovers,fiberglass bedsides
,fiberglass onepiece front,33 inch tires,4.56 geared 9 inch,3.0 motor w/5 speed(soon 5.0 and c4),corbeau suspension seats,4 point harness,fuel cell,custom dash,almost 1k lbs lighter than stock,NO LICENSE PLATES!!!!!

ya, your right about that. It must be some chinesse aftermarket varient. They make lights for a 1994? Mine look pretty pukey...

yes, ive got clear heads and corners for mine, they run about 100 on ebay




and this is what they look like with HID's

WOW. Dude those look tits!

Nice Smakes, those look good with the clear corners.

__________________
"Let me try it again! I think i can get another 10 feet of air!"


MODS=
1991 extracab 2wd,full cage front to back,camburg suspension,sway away coilovers,fiberglass bedsides
,fiberglass onepiece front,33 inch tires,4.56 geared 9 inch,3.0 motor w/5 speed(soon 5.0 and c4),corbeau suspension seats,4 point harness,fuel cell,custom dash,almost 1k lbs lighter than stock,NO LICENSE PLATES!!!!!

thanks

You could also try partstrain.com. Type in your specifics. and everything for that truck will come up. Reasonable prices

__________________

L-Mo

Thanks L-Mo. This site will help me out alot in future! If I buy parts for my truck I buy them local, thats only becuase I am kinda new to the online FRF..

I bought both taillights and headllights from partstrain and had them in 5 days. Both sets fit perfectly.HOWEVER, plug and play is not always the case.Especially when comverting to LED or lights with the halo.Let me know how you make out.

__________________

L-Mo