From the inside of the vehicle you take apart the trim around the window which will expose four nuts you need to take off. Once the nuts are off then you just need to push the glass out with care. Clean the old caulk off and put new on. I just used silicone exterior caulk from the hardware store instead of the heavy duty black stuff since it's only a side window and not a windshield. Once your cleaned up and have a good amount of caulk applied put the new window in, tighten the nuts, and reinstall the trim. Thats what i did. It worked out fine and only took an hour which included time at the junk yard to get the new glass. Glass was $12, Caulk was $3
Last edited by flatblack; 12-25-2009 at 01:19 PM.