I have a 2000 Ranger and need to replace the front blinker/side light (not the bulbs, the entire housing) I have the parts, just need some advice on how to do it

if its like th 01 there should be black tabs on the corner of the light housing you lift up on. if not then ive heard you either have to use a special tool or a way a guy figured out to get the clips off. im sure somone will chime in with the second way if thats how they were in 2000

----------

did some research your truck has the clips not the black tabs. look in the how to section of the forum. it should be in there. if not read your manual. also welcome to frf!

__________________
01 xlt 3.0 extended cab
Kenwood speakers
JVC head unit
Fusion 12" sub and Fusion amp
Monroe coilover shocks in the rear
Tow Package
Mustang Dome

actually if it's set up like my 98 it will be two screws under thturn signal light and it will just pull out and to replace just do the oposite...