I too finally bit the Projector Bullet - Page 3

DrIftKi7Vg · #31 05-11-2011, 06:26 PM

Quote:

Originally Posted by beef08

im doing this one day

One day should be real soon!

beef08 · #32 05-11-2011, 06:31 PM

i wish but im going with these shrouds and doing that

http://www.facebook.com/profile.php?...type=1&theater

DrIftKi7Vg · #33 05-11-2011, 07:39 PM

They will look nice! But don't do halos if your doing those shrouds.

beef08 · #34 05-11-2011, 10:21 PM

No you put the halos behind the shroud to make it look like that

DrIftKi7Vg · #35 05-12-2011, 04:14 AM

Quote:

Originally Posted by beef08

No you put the halos behind the shroud to make it look like that

Oh wow, nice! That would be interesting to see it done to our Rangers. You should go for it!

doyouquaxu · #36 06-22-2011, 11:23 PM

i bit the bullet, got a different style shroud but the same projectors as you. what's in the high/low harness? i didn't order one. gonna wait till next paycheck to order new headlight housings as well.

Dcrymes99ranger · #37 06-23-2011, 01:35 AM

I have a set of 01/03 clear headlights if you want these lights I can sell them to you cheep if you wanna make an extra set to sell??? 50.00 shipped

DrIftKi7Vg · #38 06-23-2011, 04:46 AM

Quote:

Originally Posted by doyouquaxu

i bit the bullet, got a different style shroud but the same projectors as you. what's in the high/low harness? i didn't order one. gonna wait till next paycheck to order new headlight housings as well.

A high/low harness is what controls you high and low beam in your projectors. Some projectors have a cutoff shield that goes up and down (on the inside of the projectors) that makes you have high beam and low beam (using only a single beam HID bulbs); and others will have a solid (non moving) cutoff shield and you would need to use some bi xenon HID bulbs which then the harness will control the bulbs in this matter and not the shields. Either way, you need to have a high and low beam harness to have a properly working bi xenon setup.

----------

Quote:

Originally Posted by doyouquaxu

i bit the bullet, got a different style shroud but the same projectors as you. what's in the high/low harness? i didn't order one. gonna wait till next paycheck to order new headlight housings as well.

Oh, and get some pictures up of your projectors! Make a thread about your bit bullet and whore it all out with pictures

.

dryin · #39 06-23-2011, 04:54 AM

looks good bro.. kinda jelous

DrIftKi7Vg · #40 06-23-2011, 05:57 AM

Quote:

Originally Posted by dryin

looks good bro.. kinda jelous

Thanks man!

doyouquaxu · #41 06-24-2011, 09:55 AM

Quote:

Originally Posted by DrIftKi7Vg

A high/low harness is what controls you high and low beam in your projectors. Some projectors have a cutoff shield that goes up and down (on the inside of the projectors) that makes you have high beam and low beam (using only a single beam HID bulbs); and others will have a solid (non moving) cutoff shield and you would need to use some bi xenon HID bulbs which then the harness will control the bulbs in this matter and not the shields. Either way, you need to have a high and low beam harness to have a properly working bi xenon setup.

Oh, and get some pictures up of your projectors! Make a thread about your bit bullet and whore it all out with pictures

.

ahhhh son of a bitch. wish i would have known about the harness when i placed the order for the projectors, now i have to wait longer.

oh well, i also ordered some LED halos off ebay (the MC-R shrouds I got have holes in them and look effing sick when back lit), and am going to order some new headlight housings this weekend too. definitely going to make a thread about it, i've wanted these things for a long time. i guess i'll pass my time by looking at them and painting my cut off shield some bright color. i might make my own harness even if i get fed up enough

DrIftKi7Vg · #42 06-24-2011, 10:41 AM

Quote:

Originally Posted by doyouquaxu

ahhhh son of a bitch. wish i would have known about the harness when i placed the order for the projectors, now i have to wait longer.

oh well, i also ordered some LED halos off ebay (the MC-R shrouds I got have holes in them and look effing sick when back lit), and am going to order some new headlight housings this weekend too. definitely going to make a thread about it, i've wanted these things for a long time. i guess i'll pass my time by looking at them and painting my cut off shield some bright color. i might make my own harness even if i get fed up enough

NO! You should buy the harness from theretrofitsource.com. I actually forgot about buying a harness for my setup and contacted Matt from the retrofit source website and he made sure a harness will be shipped to me asap and I got it within three days. I also got there halos (angel eyes) from them and you should of got it from them too. Picture would be nice with the halos you bought... Contact Matt about the harness and he will be more than glad to help you out! Definitely make a thread with all of your setup stuff and get this done to be number four on the list of members who did retro fit projectors

doyouquaxu · #43 06-24-2011, 10:48 AM

Quote:

Originally Posted by DrIftKi7Vg

NO! You should buy the harness from theretrofitsource.com. I actually forgot about buying a harness for my setup and contacted Matt from the retrofit source website and he made sure a harness will be shipped to me asap and I got it within three days. I also got there halos (angel eyes) from them and you should of got it from them too. Picture would be nice with the halos you bought... Contact Matt about the harness and he will be more than glad to help you out! Definitely make a thread with all of your setup stuff and get this done to be number four on the list of members who did retro fit projectors

i might change the halos eventually, or say eff it. i paid about $12 for the LEDs on ebay, better than the $30 TRS wants, and i don't think i can break them as easily. only time will tell

unfortunately my package already shipped, but Monday is when they're expected to arrive... they're somewhere between here and Illinois right now lol.

DrIftKi7Vg · #44 06-24-2011, 10:58 AM

Quote:

Originally Posted by doyouquaxu

i might change the halos eventually, or say eff it. i paid about $12 for the LEDs on ebay, better than the $30 TRS wants, and i don't think i can break them as easily. only time will tell

unfortunately my package already shipped, but Monday is when they're expected to arrive... they're somewhere between here and Illinois right now lol.

Do you have a link to the ebay page you bought the led stuff?

doyouquaxu · #45 06-24-2011, 11:01 AM

not the exact same, but same size/similar price

http://cgi.ebay.com/ebaymotors/2x-12...Q5fAccessories

edit: link to the ones i actually got
http://cgi.ebay.com/ws/eBayISAPI.dll...K%3AMEWNX%3AIT