Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-05-2011, 07:36 PM
racsan racsan is offline
exceding the limits
 
Join Date: Jun 2009
Posts: 169
Default replaced my gen 3 tails with gen 4 tail assy's

last year at the local fair some woman parked too close with a extended cab chevrolet and my l.r. tailight assy got cracked. when i went to the junkyard for a replacement, there were no gen 3's with tailights in the bed. i did however find a gen 4 (think it was a '99) with 2 good taillights. and the best thing about them is the backup light is closest to the ground, i can see a bit better backing up at night. was considering a set of driving lights mounted under the back bumper for auxillary back up lights, but i think these made things good enough to not need them. stock tails: my "new" gen 4 tails:
__________________
1993 ranger s/c 4.0 hurst-equipped 5-spd,3.73s ,4x4, milemarker hubs, black grille guard/tube steps,summit rear diff cover with bearing load supports.
"the green machine" (retired-r.i.p.)
'92 reg cab longbed 2.3 "polar express" (stolen)
' 97 reg cab 3.0 auto ($500 project truck)-rolled
'94 2wd longbed 2.3 manual trans
pictures--> https://www.flickr.com/photos/154582...h/37156884305/
Reply With Quote
  #2  
Old 04-05-2011, 07:59 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,049
Default Re: replaced my gen 3 tails with gen 4 tail assy's

You should throw some 01's on that or even 06+ later down the road
Reply With Quote
  #3  
Old 04-05-2011, 08:00 PM
DiabloBlanco DiabloBlanco is offline
Get Lifted.
 
Join Date: Nov 2010
Posts: 6,402
Default Re: replaced my gen 3 tails with gen 4 tail assy's

x2 on the 06+
__________________
YZ the way to be!
The Brotherhood!

Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011
Reply With Quote
  #4  
Old 04-05-2011, 08:13 PM
racsan racsan is offline
exceding the limits
 
Join Date: Jun 2009
Posts: 169
Default Re: replaced my gen 3 tails with gen 4 tail assy's

i would have, was at the junkyard for a seperate reason, picked these up while i was there.
__________________
1993 ranger s/c 4.0 hurst-equipped 5-spd,3.73s ,4x4, milemarker hubs, black grille guard/tube steps,summit rear diff cover with bearing load supports.
"the green machine" (retired-r.i.p.)
'92 reg cab longbed 2.3 "polar express" (stolen)
' 97 reg cab 3.0 auto ($500 project truck)-rolled
'94 2wd longbed 2.3 manual trans
pictures--> https://www.flickr.com/photos/154582...h/37156884305/
Reply With Quote
  #5  
Old 04-05-2011, 09:06 PM
DeepSouthRanger DeepSouthRanger is offline
Don't Stop Modding!!
 
Join Date: May 2009
Posts: 545
Default

Nice upgrade!!
__________________
So Many Mods,So little Time!!

Preformance:
SCT Livewire w/ Rogue tunes,Rogue Larger MAF Housing w/ card type sensor,MAC cold air intake,40 series FLOWMASTER exhaust w/ duals,Set of 1.7 Roller rockers,full set of under drive pulley's(Blue),Screamin demon coil,8mm heat braided wires(Blue),double patium plus,Gator back belt,200 amp(power coated blue) Alt.,Taurus fan
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone with a lifted first gen? duvaltom General Ford Ranger Discussion 3 04-01-2011 02:57 PM
For Sale: gen 1 tail lights and b&m shifter offroadohio Exterior Parts 0 12-21-2010 07:17 AM
What wheels on a second gen? logicgear Wheels and Tires 8 10-10-2010 08:31 PM
Totaled First Gen SmokeyMcPot420 Vehicle Snapshots 7 05-03-2010 11:13 AM
For Sale: Niteshaded 93-97 OEM 3rd gen. tail lights Bwad Exterior Parts 15 05-02-2010 01:52 PM