Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-15-2011, 06:00 PM
spudkilla224 spudkilla224 is offline
Ford Tough
 
Join Date: Nov 2010
Posts: 454
Default Bed Anchor Points?

Were could I bolt down bed anchor points like this: http://www.discountramps.com/cargo-tie-downs.htm

Or could I just get away with normal threaded eye-bolts?

I'm just trying to figure out were it's safe to drill and put a anchor bracket or eyebolt through in the bed of my 94 ranger?
Reply With Quote
  #2  
Old 02-15-2011, 06:04 PM
ben10 ben10 is offline
slut life
 
Join Date: Oct 2010
Posts: 3,014
Default Re: Bed Anchor Points?

they have discounted tramps?! i didnt know that was legal!

i would say just get normal eyelet ones from the hardware store and get some heavy duty big washers. but keep in mind sliding things into the bed is gonna be a hassle...
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done

98 2wd 2.5, 5 speed, dropped with some stuff done
Reply With Quote
  #3  
Old 02-15-2011, 06:12 PM
Clinton Clinton is offline
Banned
 
Join Date: Mar 2010
Posts: 14,049
Default Re: Bed Anchor Points?

Tractor supply!!!
Reply With Quote
  #4  
Old 02-15-2011, 07:07 PM
DieselBrad DieselBrad is offline
Ranger commuter
 
Join Date: May 2010
Posts: 458
Default Re: Bed Anchor Points?

Quote:
Originally Posted by spudkilla224 View Post
Were could I bolt down bed anchor points like this: http://www.discountramps.com/cargo-tie-downs.htm

Or could I just get away with normal threaded eye-bolts?

I'm just trying to figure out were it's safe to drill and put a anchor bracket or eyebolt through in the bed of my 94 ranger?
I thought 94s had 4 tie down points. One in each corer of the bed
__________________
04 Supercab 4dr 4.0 5spd 4x4 EDGE. Daily Driver
96 F350 Crewcab 460 5spd Vortech S/C 4X4 6" 35s
94 Lightning Bassani headers back CAI Underdrive Pulleys
86 F250 Reg Cab 6.9 4Spd 4x4 6" 35s (powerstoke,D60 5spd on the way)
80 F350 Reg Cab 429 C6 4x4 L&L headers F450 rear springs All Out Pulling Truck(D60 Laddered Frame, 540cid coming)
Reply With Quote
  #5  
Old 02-15-2011, 09:58 PM
HazardousRanger HazardousRanger is offline
Hazardous to Your Health!
 
Join Date: Jan 2011
Posts: 9,995
Default Re: Bed Anchor Points?

ive been thinking about doing this....
put them in the corner at the very bottom where the body curves...wont have any issues w stuff in back! OR bolt them to the side rail...ugly though
__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: 1997 ford ranger long bed bed liner wantede 97fordrangerproject Exterior Parts 2 03-16-2011 12:12 PM
any grease lube points on my 2010 2010 General Tech 4 11-29-2010 06:46 PM
Bed Rail Caps for Long Bed (7') 1999 guitartmaker Exterior Tech 5 09-22-2010 10:25 AM
Rotor Replacement and Jack Points Ndonner Suspension Tech 2 07-30-2010 04:42 AM
front lower control arm mount points asymetrical? BoomZilla Suspension Tech 0 06-02-2010 04:13 PM