Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 01-06-2011, 10:01 PM
algaziano algaziano is offline
Learning to use the forums
 
Join Date: Jan 2011
Posts: 2
Default help with painted mirror part

hey fella's and gal's i just got a 08 ranger and the painted part on the mirror is not sitting fluch how do i pop it off and put it on?? i don't want to crack it!

thanks

alfonzo~~
Reply With Quote
  #2  
Old 01-07-2011, 02:42 AM
STL STL is offline
...............

 
Join Date: May 2009
Posts: 23,398
Default Re: help with painted mirror part

They just pop off. I think you can use a flat blade screw driver and pop it off starting at the bottom.
__________________
2005 Edge

Reply With Quote
  #3  
Old 01-07-2011, 08:09 AM
algaziano algaziano is offline
Learning to use the forums
 
Join Date: Jan 2011
Posts: 2
Default Re: help with painted mirror part

thanks allot i will give it a try as soon as i can.

al
Reply With Quote
  #4  
Old 01-08-2011, 12:45 PM
joshfarnham joshfarnham is offline
danger ranger
 
Join Date: Jan 2011
Posts: 3
Default Re: help with painted mirror part

i have an '08 and i had to use a flat screwdriver from the inside to release the clips, if you don't you might break the clips off
__________________
2008 FX4 4.0L 5 spd
K&N intake, Flowmaster exhaust
underdrive pulleys
Tbars cranked 2", 1.5" shackels
3" PA body lift
15"X8" Pro Comp Extreme Alloys
33"X10.5" BFG M/T KM2's
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: power mirror switch Mississippiedge Interior Parts 3 12-01-2010 10:23 PM
Rearview mirror 98rangerxlt General Ford Ranger Discussion 1 09-03-2010 09:21 PM
Painted XLT bumper part number? 02'4.04x4 Exterior Tech 30 08-26-2010 06:27 PM
mirror question More_Cowbell Exterior Tech 0 06-01-2010 04:34 PM