Hi, When I bought my truck it had in-channel vent visors on it that I removed. Well the channels are stretched out and allow wind noise.
I am not really clear on what they are called now as I cannot find anything on channel felt? Any help appreciated!
02' XLT 4.0 4x4 Loaded.

Would love to find a good set off a wreck but no ones interested in figuring out how to remove them and I'm not sure.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

should have left the window vent visors there.

__________________
2001 Ranger Edge 4x4 (sold)
2006 F150 Lariat 4x4 (sold)
2007 Explorer XLT (Destroyed by Deer on highway)
2014 Explorer XLT (inherited from parents)

Are we talking about weather strip? What exactly is "all stretched out?"
Why do you mention "channel felt?" Do you need adhesive felt pads to use as shim material?


EDIT---you know that weather stripping pulls right out don't you? If that's what you're talking about.

__________________
08 4.0 Sport 4x4
Stock

Seems that way. . .

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

If it is the weather strip you can purchase from LMCtruck.com

Page 13 of the catalog http://www.lmctruck.com/icatalog/fr/full.aspx?Page=13

__________________

You are amazing where do you find this stuff? Many thanks.

----------

Wasn't sure how to answer this one.
Think about an in channel visor and how it sits in the channel and you should be able to figure it out. Difficult to explain, it's the rubber at the top part of the front door windows, the part you see from the outside is stretched outward. Thanks

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come

You didn't have to answer my question. Looks like your talking about item 11. Simple!

__________________
08 4.0 Sport 4x4
Stock

^^^part is not listed in this diagram^^^^^.... it's called window channel seal..

example:


Part #4 is what you're looking for

__________________
MY BUILD THREAD
1999 MAZDA 2500SE, 2.5L 4-clanger, 5 speed, Green n slow. Rangers as daily drivers since 1988.
ASE Certified Mechanic, Builder of Show Destroying Protouring and Classic cars..

Hmm, well it seems I am mystified as it appears that it is a multi part thing that I will have to look into a little further.

Terry you are correct as I now see that the initial diagram is depicting stripping. The part I am now unclear about is part#'s 1 & 4. I noticed that part # 1 seems to stand out a bit from the window when it is rolled all the way up. I'll have to get back to town and check it out when I take the plow mount to be powder-coated, Oh Yeah!

Many thanks for the clarifications it wa kind of hard to try and explain.

----------

Ha ha, yea one would think huh.

__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come