ok, so I am going to be doing my gap guards but am curious if anyone has done the fron wheel wells..
I am missing one and it looks like crap..

__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate

I think jeweler54 has one. When I did my lift I just bought the set. It was 79.00 through summit racing

Oh, didnt realize set came with front guards too.

__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate

Ya but the front one is easy. If you take the one you have and just flip it over you can use it as a template for the other side.

__________________

I thought about that.. My only concern is making sure it doesnt look cheap.
Guess I will finish undercoat tomorrow and go from there.

__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate

Yeah .....And post pics of all that good stuff man!

I saw a how to on here about making your own gap guards
by using some black rubber mat and cutting it to size. if you undercoat over it would look like a factory job?

__________________
2001 Ranger Edge 4x4 , Stepside,FRF decals, 4.0L SOHC decals, Primus IQ brake controller, curt 2" rec. hitch, custom winch mount,
Tinted glass, Yellow BUGGMAN OVALS a real treat to have. OHC, CB, night vision goggles, 36" periscope,
DiabloAmarillo = The Yellow Devil

http://www.fordrangerforum.com/exter...ap-guards.html<==CLICKY

__________________