Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!
FRF Store Register Ranger Pictures Community Today's Posts Search

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-06-2017, 03:56 AM
pelicanman pelicanman is offline
Ford Tough
 
Join Date: Nov 2011
Posts: 378
Default remove bed ??

I don't know for sure yet,but I might need a new fuel filler neck.

If so,do you HAVE TO,remove the bed to replace the neck ???

I certainly hope not !!!

see ya,old retired guy
__________________
06 ranger XL reg cab
3.0 auto/3.73
stock except/30x9.5x15s
15x8 silver cragar soft 8s
white A.R.E. topper
93,500+miles
Reply With Quote
  #2  
Old 08-06-2017, 07:18 AM
RAT Ranger RAT Ranger is offline
Ford Ranger Driver
 
Join Date: May 2009
Posts: 1,419
Lightbulb Imo

===================
EASIEST WAY:
You will need to take out all the bed bolts and 3 screws at fill end, to move it back a couple feet to access the tank end and remove the unadjustable band clamp to install a new worm clamp along with new hose.
__________________
ALL THROTTLE, NO BOTTLE!!!

Daily Driver: 98 Thunderbolt

TOY: Green 94 Pro Street
Reply With Quote
  #3  
Old 08-06-2017, 07:41 AM
Mike69 Mike69 is offline
Another old fart
 
Join Date: Oct 2013
Posts: 7,486
Default Re: remove bed ??

Patrick, as stated above that is the easiest way to do it. I am an older guy with a bad back & I used an engine hoist to remove the bed off my 2000 Ranger when I did mine. I found that way easier then laying under the truck or removing the gas tank. I responded to your thread about the filler neck with a link to where I purchased the one for my Ranger.

__________________
2000 Ranger Extd Cab XLT, 4X4 Off Road, 4.0L, Auto, 8.8 - 4.10's, 01 grille & lights swap.
69 Mustang, modified 5.0, & 5spd.(project)
99 Explorer Sport, 4.0 SOHC, Auto, 8.8 - 4.10's, PW, PL, PM, Cruise, Tilt. (Wife's DD)
05 F-150 2WD Regular Cab. ( My DD)
Reply With Quote
  #4  
Old 08-06-2017, 10:14 AM
JAMMANICA JAMMANICA is offline
Craigslist is awesome
 
Join Date: Jun 2016
Posts: 557
Default Re: remove bed ??

Not meaning to hijack but I need to pull a fuel pump on one of mine to remove the regulator, would pulling the bed be the best way for that also?
__________________
00 XLT 4WD XCSB 4.0 my new baby
00 XLT 2WD RCSB 5.0 swap in progress.
98 XLT 4WD XCSB 4.0 dead
99 EXPO donor motor for dead one and parts for the others.
Newest Ranger Forum
Reply With Quote
  #5  
Old 08-06-2017, 11:16 AM
pelicanman pelicanman is offline
Ford Tough
 
Join Date: Nov 2011
Posts: 378
Default Re: remove bed ??

Thank you
For now the gas cap light has not returned,but i bet it will ,next gas up.
The gas fill hole plate has fallen in the neck.Leaveing a larger hole in its place.
The cel has not come on yet,since i disconnected battery.But i bet it will next fill up.You can still put gas in.If i have to move bed back i'm f..ked.My topper is on,
plus a ton of stuff in the bed.Because of my temp.living arrangements.
Sorry,no means of pics to show.
For now i'll wait till light shows up again.Does anybody have a magical way of installing a fuel neck without moving the bed,
see ya,old retired guy
__________________
06 ranger XL reg cab
3.0 auto/3.73
stock except/30x9.5x15s
15x8 silver cragar soft 8s
white A.R.E. topper
93,500+miles
Reply With Quote
Reply



Similar Threads
Thread Thread Starter Forum Replies Last Post
'89 2.9L remove a/c 19892.9L 2.9 Liter Tech 3 09-10-2015 05:49 PM
How do i remove my bed??? Yaroleck Exterior Tech 13 07-26-2014 02:36 PM
Please Remove Me GAROUTTE78 Site Announcements, Comments and Suggestions 5 04-22-2012 12:30 PM
How should I remove this? FFWalters Exterior Tech 12 03-26-2012 06:07 PM
how to remove a bed????? xltranger99 Exterior Tech 7 05-25-2011 04:32 PM